665634
32
Zoom out
Zoom in
Vorherige Seite
1/94
Nächste Seite
HOW TO MAKE COPIES
- 32 -
1
2
3
4
5
6
5
Press the [START] button on the control
panel.
Copying starts. The paper exits with its copied side down.
Note
Be careful because the paper exiting area and the
paper itself are hot.
The menu shown below may appear when you are using
particular modes.
This menu appears when “SADF (single feed mode)” is
set to the document feeder or in modes where the original
is placed on the document glass and the scanned data
are temporarily stored in the memory, such as sort
copying or 1-sided to 2-sided copying. When this menu
appears, follow the procedure below.
Memo
There are different messages displayed on the upper
part of the menu for when the originals are scanned
through the RADF and for when scanning is performed
through the document glass.
6
Place the next original, and then press the
[START] button on the control panel or
[NEXT COPY] on the touch panel.
Scanning starts. (When “SADF (single feed mode)” is set
to the document feeder, an original is fed automatically
when it is placed on the RADF.)
7
Press [JOB FINISH] on the touch panel after
all the originals have been scanned.
Copying starts.
Memo
If you want to stop copying, press [JOB CANCEL].
When the tray runs out of paper during copying,
another tray can feed paper instead if it holds paper of
the same size and orientation, and copying will not
stop. If there is no such tray, copying stops and “Add
paper” appears on the touch panel. In this case, add
paper to the tray.
Stopping and restarting copying
1
Press the [STOP] button on the control
panel.
Copying or scanning stops.
2
Press [JOB CANCEL] on the touch panel to
stop copying. Press [NEXT COPY] on the
touch panel or the [START] button on the
control panel to restart.
When you press [JOB CANCEL], the scanned data will be
deleted and any waiting jobs will be performed.
Memo
Even if you do not press [JOB CANCEL], the scanned
data will be deleted by means of the automatic function
clear.
FC
32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Oki MB770 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info