Bedienungsanleitung Oki MB770 (Seite 47 von 94) (Englisch)

665634

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

BASIC COPY MODES

- 47 -

Enlargement and Reduction

Copying

You can change the reproduction ratio of copied images in the

following procedures:

Automatic Magnification Selection (AMS):

You need to specify the copy paper size in advance. Then this

equipment will detect the original size and automatically select

the optimal reproduction ratio for the copy paper size.

Specifying both original size and copy paper size

separately:

You need to specify both the original size and the copy paper

size separately in advance. According to the sizes you

specified, the optimal reproduction ratio is selected

automatically. This feature is used when Automatic

Magnification Selection is not available, such as when copying

OHP film originals.

Specifying reproduction ratio manually:

You can select the desired reproduction ratio by pressing

[ZOOM] or one-touch zoom buttons on the touch panel.

Memo

• The available range of reproduction ratio differs depending

on whether the original is placed on the document glass or

on the RADF (Reversing Automatic Document Feeder).

Document glass: 25 to 400%

RADF: 25 to 200%

Automatic Magnification Selection

(AMS)

When using the RADF (Reversing Automatic Document

Feeder), specify the copy paper size in advance so that this

equipment will detect the original size and automatically select

the optimal reproduction ratio to the copy paper size.

This function is available when the size of the originals is as

follows:

Other than North America: A4, A5, B5, Folio

North America: Letter, Legal

 P.28 "Acceptable originals"

Note

• This function does not work properly when copying on the

document glass or using the originals below. Select other

methods when copying them.

• Highly transparent originals (e.g. OHP film, tracing paper)

• Totally dark originals or ones with dark borders

• Non-standard size originals (e.g. newspapers, magazines)

Place paper in the tray(s).

Press [ZOOM] on the touch panel.

Select the desired paper size, press [AMS]

and then [OK].

Memo

• If you want to select a paper size other than the

following, you need to register the size as “OTHER”.

Once you register this size, it will be specified every

time you press [OTHER] on the touch panel.

Other than North America: A4, A5, B5

North America: Letter, Legal

For how to register, see the following page:

 P.48 "Registering paper sizes to “OTHER” size"

• Paper sizes can also be registered by pressing the

desired tray button of the equipment status indication

area on the BASIC menu.

Place the original(s).

If the original is placed on the document glass, the

reproduction ratio is set when the original is placed. If the

original is placed on the RADF, the reproduction ratio is

set when the original is scanned.

Select other copy modes as required, and

then press the [START] button on the

control panel.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oki MB770 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info