492975
87
Zoom out
Zoom in
Vorherige Seite
1/133
Nächste Seite
Advanced network settings > 87
C
ONTROLLING
ACCESS
USING
IP
ADDRESS
(IP
FILTERING
)
You can control access to the machine using the IP address. You can set whether to allow
configuration or printing from the specified IP addresses. By factory default, IP filtering is
disabled.
1. Access the machine’s web page and log in as the administrator.
2. Select Admin Setup.
3. Select Network > Security > IP Filtering.
4. Follow the on-screen instructions to specify the detailed settings.
5. Click Submit.
The network system reboots to enable the new settings.
C
ONTROLLING
ACCESS
USING
MAC
ADDRESS
(MAC
ADDRESS
FILTERING
)
You can control access to the machine using the MAC address. You can allow or reject the
access from the specified MAC addresses.
1. Access the machine’s web page and log in as the administrator.
2. Select Admin Setup.
3. Select Network > Security > MAC Address Filtering.
4. Follow the on-screen instructions to specify the detailed settings.
5. Click Submit.
The network system reboots to enable the new settings.
NOTE
Be sure to specify the correct IP address. If you specify a wrong IP address,
you cannot access the machine using the IP protocol.
When you enable IP filtering, the access to and from a host that is not specified
in this procedure is rejected.
You can use only IPv4 for IP filtering.
NOTE
If nothing is registered in Administrator’s IP Address setting, you may not
be able to access the machine depending on the specified IP address range.
Your Current Local Host/Proxy IP Address and the IP address of your
host may not match if you use a proxy server.
NOTE
Be sure to specify the correct MAC address. If you specify the wrong MAC
address, you cannot access the machine via a network.
You cannot individually specify acceptance or rejection for each address.
NOTE
If nothing is registered in Administrator’s MAC Address setting, you may
not be able to access the machine depending on the specified MAC address.
Your Current Local Host/Proxy MAC Address and the MAC address of
your host may not match if you use a proxy server.
87

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

oki-mc562

Suche zurücksetzen

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Oki MC562 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Oki MC562

Oki MC562 Bedienungsanleitung - Deutsch - 201 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info