Bedienungsanleitung Oki MPS3537 (Seite 33 von 357) (Englisch)

645020

Zoom out

Zoom in

Vorherige Seite

1/357

Nächste Seite

PRINTING FROM WINDOWS

- 33 -

Update Automatically

Select this check box to update the option configuration

information automatically every time you open the [Device

Settings] tab.

[Update Now]

Click this to obtain the configuration information from this

equipment immediately.

Memo

• If the connection to the equipment has not been

configured correctly, the message “The address of your

machine could not be located. Would you like to find it?”

will be displayed when you click [Update Now]. If it is

displayed, click [Yes] and search for the equipment

using the [Local Discovery] dialog box. After searching

for the equipment, SNMP communication will be

enabled. For the instructions on how to search for the

equipment, refer to the instructions of

TopAccessDocMon.

Note

• If you disable SNMP Communication,

TopAccessDocMon notification also will be disabled.

9) [Restore Defaults]

Click this to restore the configuration of this equipment

displayed in the [Device Settings] tab menu to the original

factory defaults.

Tray Settings

1) Paper Size

Select the paper size set in each tray.

2) Paper Type

Select the paper type set in each tray.

3) Attribute

Select the attribute of the paper. When you set the attribute,

the tray will be selected preferentially according to the print

settings.

4) Override Application Paper Source Settings

Select this check box to use the paper source setting in the

printer driver rather than the application setting.

5) [Restore Defaults]

Click this to restore the settings displayed in the [Tray

Settings] dialog box to the original factory defaults.

Memo

• Trays selectable differ depending on the option

configuration.

Account Settings

Memo

• When SNMP communication is enabled, the following

account information is automatically obtained from the

equipment.

1) User Authentication

Select the authentication method which is to be used. Set it

to correspond to that of your MFP.

- Off — Select this not to perform user authentication.

- MFP Local Authentication — Select this to perform

MFP Local Authentication.

- Windows Domain Authentication — Select this to

perform Windows Domain Authentication.

- LDAP Authentication — Select this to perform LDAP

Authentication.

2) Enter the user credentials manually

When this check box is selected, you are prompted to enter

your user name and password every time you print a

document. This option is available when any of MFP Local

Authentication, Windows Domain Authentication, or LDAP

Authentication is selected in the [User Authentication] box.

Memo

• This option can be used together with any of the user

authentication functions (MFP Local Authentication,

Windows Domain Authentication, LDAP Authentication).

3) User Name

The user name that is entered to log in to your computer is

displayed.

4) Domain Name

The domain name on which the equipment belongs is

displayed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oki MPS3537 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oki MPS3537

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info