Bedienungsanleitung Oki MPS3537 (Seite 28 von 96) (Englisch)

645020

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

HOW TO MAKE COPIES

- 28 -

● HOW TO MAKE COPIES

Before Making Copies

Storage of color copies

When storing color copies, be careful of the following:

• Avoid a place exposed to light. The colors may fade when

they are stored in such a place for a long time.

• If copies are stored pressed between plastic sheets made

of chloroethylene for a long time, toner may melt and stick

to the plastic. For long-time storage, use polyethylene

binders.

• When a color copy is folded, toner at the folded part may

flake off. Do not fold color copies when storing them.

• Toner on copies may melt if it touches solvent or ink not

fully dried. Keep copies away from them.

• When copies are left under an extremely high temperature

environment such as in the vicinity of a heater, toner may

melt. Store them at room temperature and avoid extreme

temperature changes.

Placing Originals

Acceptable originals

When the RADF (Reversing Automatic Document Feeder) is

used, 2-sided originals can be automatically scanned one

sheet after another. When the document glass is used,

originals such as OHP films, tracing paper, booklet or

3-dimensional objects, that cannot be placed on the RADF can

be scanned, as well as plain paper.

Note

• Automatic size detection does not work properly when A/B

format originals are used in equipment for North America. It

does not work properly when LT format originals are used in

equipment other than that for North America.

• In some models, automatic size detection does not work

properly when K format paper is used for printing. (K format

is a standard paper size in China.)

• Do not place any heavy objects (8 Kg(18lb.) or over) on the

document glass and do not press on it with force.

• Be sure to place A5-size originals in a landscape direction

when using the RADF.

• A maximum of 1000 sheets can be scanned per 1 copy job

or up until the embedded memory becomes full.

Placing originals on the document glass

The document glass can be used for originals such as OHP

films or tracing paper, as well as plain paper, that cannot be

placed on the RADF.

Do not place any heavy objects (8 Kg(18lb.) or over) on the

document glass and do not press on it with force.

Breaking the glass could injure you.

Raise the RADF.

Place the original with its face down on the

document glass and align it with the left

rear corner of the glass.

Location

Maximum

size

Paper

weight

Accetable sizes for

automatic size

detection

Document

glass

Length:

215.9mm

(8.5")

Width:

355.6mm

(14")

20mm or

less

Document size cannot

be detected

automatically.

RADF

60 to

105 g/m

Other than North

America:

mixed-size setting is

disabled:

A4, A5, B5, Folio

mixed-size setting is

enabled:

A4, Folio

North America:

Letter, Legal, Legal13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oki MPS3537 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oki MPS3537

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info