Bedienungsanleitung Oki MPS3537 (Seite 58 von 96) (Englisch)

645020

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

BASIC COPY MODES

- 58 -

Setting share folder

When a user who has the privilege of setting a share folder has

pressed [REMOTE 1] or [REMOTE 2], the menu for specifying

a directory appears.

The setting items differ depending on the file transfer protocol

to be used. FTP, SMB, NetWare IPX/SPX, NetWare TCP/IP

and FTPS are selectable for a file transfer protocol.

FTP / FTPS

When you press any of the buttons below, the on-screen

keyboard appears. Enter with the buttons on the touch panel or

the digital keys on the control panel. When you finish the entry,

press [OK].

SERVER NAME: Press this to enter the IP address of FTP

server. For example, if the data should be transferred to an

FTP folder ftp://10.10.70.101/user01/scan/, key in

“10.10.70.101”.

NETWORK PATH: Press this to enter a network path to an

FTP folder where the data are to be stored. For example, if

the data should be transferred to an FTP folder ftp://

10.10.70.101/user01/scan/, enter “user01\scan”.

to the FTP server. Enter this as required.

PASSWORD: Press this to enter a password to login to the

FTP server. Enter this as required.

COMMAND PORT: Press this to key in a command port

number for executing commands. Normally “-” is entered in

this field, which means that a port number set by the

administrator will be used. Change this only when you want

to use any other port number.

SMB

When you press any of the buttons below, the on-screen

keyboard appears. Enter with the buttons on the touch panel or

the digital keys on the control panel. When you finish the entry,

press [OK].

NETWORK PATH: Press this to enter a network path to the

folder where the data are to be stored.

access the network folder. Enter this as required.

PASSWORD: Press this to enter a password to access the

network folder. Enter this as required.

Memo

• If you selected [SMB], the settings for [SERVER NAME] and

[COMMAND PORT] are not required.

NetWare IPX / NetWare IP

When you press any of the buttons below, the on-screen

keyboard appears. Enter with the buttons on the touch panel or

the digital keys on the control panel. When you finish the entry,

press [OK].

SERVER NAME: When you select [NetWare IPX], enter either

the server name of NetWare server or Tree/Context (if NDS

is usable). When you select [NetWare IP], enter the IP

address of NetWare server.

NETWORK PATH: Press this to enter a network path to a

NetWare server folder where the data are to be stored. For

example, if the data should be transferred to a folder

“sys\scan” of NetWare server, enter “\sys\scan”.

NetWare server. Enter this as required.

PASSWORD: Press this to enter a password to login NetWare

server. Enter this as required.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oki MPS3537 Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oki MPS3537

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info