Bedienungsanleitung Oki MPS4700 (Seite 164 von 182) (Englisch)

645023

164

Zoom out

Zoom in

Vorherige Seite

1/182

Nächste Seite

Changing Network Settings From the Web Page

- 164 -

9 Enter attribute names to be searched for

as the user name in [User Name].

Be sure to specify a value for [Name 1].

10 Enter an e-mail address to be searched

for in [Mail Address].

11 If necessary, specify a search condition

in [Additional Filters].

12 Select the authentication method you

want in [Method].

Note

 When you select [Anonymous] or [Simple], user

authentication using LDAP fails. You need to select

[Digest-MD5] or [Secure Protocol] if you configure

the LDAP server for user authentication.

Memo

 When you select [Digest-MD5], you need to

configure the DNS server setting.

 When you select [Secure Protocol], you need to

configure the DNS server and the secure protocol

server settings.

13 If you do not select [Anonymous] in

step 12, specify the user ID and

password to log in to the LDAP server.

14 Select the encryption method in

[Encryption].

15 Click [Send].

The network card reboots to enable the new

settings.

Configuring Secure Protocols

Authentication using the Kerberos server is

available when you access the LDAP server. In

order to use the secure protocol, be sure to

complete the SNTP and DNS server settings.

1 Access the machine's web page and log

in as the administrator.

2 Select [Admin Setup].

3 Select [Network Manager]>[Secure

Protocol Server Setting].

4 Enter a realm name in [Domain Name].

5 Click [Send].

The network card reboots to enable the new

settings.

Printing Without Printer Driver

(Direct Print)

Printing PDF Files

You can print PDF files without installing the

printer driver. Specify the file you want to print

on the web page and sent it to the machine.

Memo

 Additional RAM memory may be necessary depending on

the PDF file.

 Printing may not be correct depending on the PDF file.

When printing is not correct, open the file with Adobe

Reader and then print.

1 Access the machine's web page.

2 Click [Direct Print].

3 Select [Web Printing].

4 Follow the on-screen instructions to

specify detailed settings.

5 Check the settings and then click [OK].

The data is sent to the machine and the printing is

started.

Configuring Server to Print Files

Attached to E-mails

You can print a file that the machine receives as

an attachment to an e-mail.

Memo

 Up to 10 files can be printed. The maximum size for each

file is 8 MB.

 PDF, JPEG, and TIFF files can be printed.

 Additional RAM memory may be necessary depending on

the PDF file.

 Printing may not be correct depending on the PDF file.

When printing is not correct, open the file with Adobe

Reader and then print.

 Configuration for POP

1 Access the machine's web page and log

in as the administrator.

2 Select [Admin Setup].

3 Select [Network Manager]>[E-mail]>

[Receive Settings].

4 Select [POP3] and then click [To

STEP2].

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oki MPS4700 Seite 164

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oki MPS4700

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info