665298
115
Zoom out
Zoom in
Vorherige Seite
1/142
Nächste Seite
- 115 -
Network Setting Items
4
4. Network Settings
Shaded text indicates the factory default setting.
Item
Setting Description
Web browser
Conguration
Tool
(Network
Setting Plug-in)
Network
Card Setup
(Mac)
Start Address 1-10 - - 0.0.0.0 Specify the IP addresses
that are allowed to access
the printer. You can specify
an individual address or an
address range. Specify the
start address and end address
when setting the address
range. Entering “0.0.0.0”
disables the setting.
End Address 1-10 - - 0.0.0.0
Printing 1-10 - - ENABLE Set whether to allow to
changes to the conguration
from the IP addresses specied
in IP Address Range #1-10.
DISABLE
Conguration 1-10 - - ENABLE Set whether to allow to
change conguration from the
IP addresses specied in IP
Address Range #1-10.
DISABLE
Administrator’s IP Address to
Register
- - 0.0.0.0 Set the IP address of the
administrator. Only this
address can always access the
printer. Remember that when
the administrator accesses the
printer via a proxy server, this
item is set to the address of
the proxy server and all access
via the proxy server is allowed.
It is recommended that the
administrator accesses the
printer without using a proxy
server.
MAC Address Filtering
Shaded text indicates the factory default setting.
Item
Setting Description
Web browser
Conguration
Tool
(Network
Setting Plug-in)
Network
Card
Setup
(Mac)
MAC Address Filtering - - ENABLE Set whether to use MAC address
ltering, the function to allow
access only from MAC addresses
specied. This function requires
thorough knowledge of MAC
addresses. Normally, select
[DISABLE]. Set the items
below properly when selecting
[ENABLE]; otherwise, no access
is allowed from the network.
DISABLE
MAC Address Access - - ACCEPT Set whether to allow or deny
access from the MAC addresses
specied in MAC Address #1-50.
DENY
MAC Address #1-50 - - 00:00:00:
00:00:00
Specify the MAC addresses that
are allowed to access the printer.
Entering “00:00:00:00:00:00”
disables the setting.
115

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Oki MPS5501b wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Oki MPS5501b

Oki MPS5501b Bedienungsanleitung - Deutsch - 175 seiten

Oki MPS5501b Bedienungsanleitung - Englisch - 157 seiten

Oki MPS5501b Zusatzinformation - Holländisch - 153 seiten

Oki MPS5501b Bedienungsanleitung - Holländisch - 169 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info