Bedienungsanleitung Oki MPS5502 (Seite 62 von 94) (Englisch)

665636

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

SENDING/RECEIVING A FAX

- 62 -

Setting the transmission conditions

You can set the fax transmission conditions.

Memo

• The transmission conditions are only applied to the current

transmission. They return to the default settings after the

transmission.

• Each default setting of resolution, original mode, exposure,

transmission mode and ECM is adjustable.

 Advanced Guide

 Making settings

Pressing [OPTION] on the fax screen will display the

transmission condition setting screen as shown below. Set

each setting item, and then press [OK].

• Press or to switch the pages.

• To cancel the operation and return to the previous screen,

press [RESET].

RESOLUTION

Set the resolution based on the fineness of the original.

Memo

• If the recipient’s fax machine is not capable of receiving

originals at the same resolution, the resolution is

automatically converted before being sent to the recipient.

The higher the resolution is, the longer it takes to send an

original.

TX TYPE

Set the fax transmission mode.

ORIGINAL MODE

Set the scanning mode based on the type of the original.

Memo

• In the TEXT/PHOTO mode or PHOTO mode, transmission

time may be longer than that in the TEXT mode.

ORIGINAL SIZE

Set the scan size of the original.

Memo

• If the recipient’s fax machine is not capable of receiving

originals of B5 size, this equipment may reduce that size

before sending it. To avoid this, when the original to be set is

B5 size, specify A4 size respectively.

EXPOSURE

Set the density at which the original is to be scanned.

STANDARD: This is suitable for an original with regular

size text.

FINE: This is suitable for an original with small size

text and fine illustrations.

U-FINE: This is suitable for an original with ultra-fine

illustrations.

MEMORY TX: Send the original after the scanned data are

saved in the memory. Up to 100

transmissions of up to 1000 pages per 1

transmission can be reserved.

DIRECT TX: Send the original directly as it is being

scanned. Once a page has been scanned

and sent, the next page is scanned and

sent. Therefore, it takes longer to scan and

send all pages. However, you can confirm

on the fly that each page is sent to the

recipient.

TEXT: This is suitable for an original with text and

line drawings.

TEXT/

PHOTO:

This is suitable for an original with a mixture

of text and photos.

PHOTO: This is suitable for an original with photos.

AUTO: The size of the original is automatically

determined before the original is scanned.

MIXED

ORIGINAL

SIZES:

Select this function to load the originals with

different width into the RADF (Reversing

Automatic Document Feeder).

Specified

size:

The original is scanned at the preset size

regardless of its actual size.

AUTO: This equipment automatically detects the

contrast of the original, and scans it with the

optimum density.

Manual:

Press or to set the desired

contrast.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oki MPS5502 Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info