Bedienungsanleitung Oki Pro8432 WT (Seite 11 von 79) (Englisch)

665285

Zoom out

Zoom in

Vorherige Seite

1/79

Nächste Seite

- 11 -

1. Convenient Print Functions

For Windows PS Printer Driver

1 From the [File] menu, select [Print].

2 Click [Preferences] or [Properties].

3 Select [Paper/Quality] tab.

4 Select [Multi-Purpose Tray] from

[Paper Source].

5 Click [Advanced].

6 Click [Paper Size] and then select [A4]

or [Letter] from the drop-down list.

7 Click [OK].

8 Congure other settings if necessary and

then start printing.

For OS X PS Printer Driver

1 From the [File] menu, select [Page

Setup].

2 Select [A4] or [Letter] from [Paper

Size].

3 Select [Print] from [File] menu.

4 Select [Paper Feed] from the panel

menu.

5 Select [All pages From] and then select

[Multi-Purpose Tray].

6 Congure other settings if necessary and

then start printing.

Memo

● If setting details are not displayed in the print dialog

box for OS X, click [Show Details] at the bottom of

the dialog box.

Printing on Custom Size Paper

You can register a customized paper size on the

printer driver so you can print on nonstandard

paper such as banners.

● Settable custom size range

Width: 64 to 297 mm

Length: 90 to 431 mm

Paper sizes that can be fed differ depending on

the tray.

Note

● Register the paper size as portrait, and load paper in

portrait orientation.

● This function may not be available in some applications.

● If paper is so long that it exceeds the paper supports of

the MP tray, support it by hand.

● When using tray 1, press the scroll button or on the

operator panel > [Menus] > [Tray Conguration] >

[Using Tray Cong] > [Paper Size] > [Custom] before

doing the following procedure.

● If images are not correctly printed on large size paper,

selecting [Standard (600x600dpi)] for [Print Quality],

image in the PS printer driver may allow for correct

printing.

● Use of paper with a width of less than 100 mm is not

recommended. Doing so may cause paper jams.

Reference

● For details on the paper sizes that can be fed on each

tray, refer to the User’s Manual (Setup).

● The [Auto Tray Change] is enabled by default. When

the tray runs out of paper during printing, the printer

automatically begins feeding paper from that tray. If you

want to feed custom paper only from a particular tray,

disable auto tray switching. For auto tray change, refer to

"Auto Tray Switching" P.21.

 Specifying Custom Sizes

To load custom size paper, you need to register

the width and length of the paper before

printing. The range of the sizes you can set

differs according to the paper tray.

Tray Available size range

Tray1 Width:

105 to 297 mm (4.1 to 11.7 inches)

Length:

148, 182 to 431 mm (5.8 to 17.0 inches)

MP tray Width:

64 to 297 mm (2.5 to 11.7 inches)

Length:

90 to 431 mm (3.5 to 17.0 inches)

Note

● You can congure the [Custom] setting only when

[Paper Size] is set to [Custom].

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oki Pro8432 WT Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oki Pro8432 WT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info