Bedienungsanleitung OldScool 23C10 - 23045 (Seite 28 von 69) (Deutsch, Englisch, Holländisch, Französisch)

808613

Zoom out

Zoom in

Vorherige Seite

1/69

Nächste Seite

4. Press the single espresso button and run about 100ml of water through the steam pipe

5. Press the single espresso button again, stopping the flow of water.

6. Turn the position of the steam pipe rotary knob back to the "-" position

7. Insert the sieve holder with the selected sieve (single or double) without putting in espresso powder

8. Place the collection tray under the drip grid

9. Grab the sieve holder by the handle and insert it into the opening in the machine, turning it one turn to the right from the

open lock position, to the closed lock position. The sieve holder will clamp in place

10. Press the selected single espresso button and again let about 100ml of water run into the collection tray

11. Press the selected single espresso button again to stop the water supply

12. Take the collection tray and discard the water

13. Take the sieve holder by the handle and turn it one turn to the left towards the open lock symbol the sieve holder detaches

from the appliance and drops down slightly

14. Rinse the sieve holder together with the sieve and dry with a soft cloth

Note: When using the machine for the first time, make approx. 5 cups of espresso and discard them. These first cups do not taste very

good yet.

Preheating the cups

When the espresso machine is ready for use, the warming plate at the top of the machine heats up. Here you can place the espresso

cups to already warm them up a little.

You can also warm up the cup in which you want to make the espresso by flushing it. With this operation, you heat up both the sieve,

the sieve holder and the cup you want to use in 1 go. This explanation follows in these instructions under Flushing

It is also possible to preheat the cup with water coming from the steam pipe. This explanation follows further in this instruction under

the Hot Water Preparation section.

Flushing, preheating the sieve and sieve unit

Before using the sieve and sieving unit, flush them with warm water. Preheating these 2 parts both improves the flavour of the

espresso. This method is called flushing.

What should you pay attention to?

- The machine should be ready for use, the blue LED lights of both the single and double espresso button should be on

continuously.

The dial on the side of the machine for the steam supply is in the "-" position (off)

- Place the selected sieve with the sieve holder without espresso powder, when placing the sieve holder on the machine, follow

the previously indicated steps from the open latch to the closed latch position.

- Place a cup under the sieve holder

- Press the selected espresso button (single or double) and stop the flow after about 40ml of water has entered the cup (this

corresponds to one espresso)

- Press the espresso button again to stop the water flow

- Leave the hot water in the cup and, in the meantime, prepare the process for actually making an espresso. Only then when

you are about to make the espresso pour the water from the cup to be used

- When you go to put the espresso powder in the sieve make sure it can be hot. It should also be dry before you place the

espresso powder in it.

Measuring and mashing the espresso powder

CAUTION!

• Espresso powder comes in different varieties. It is important to pay attention to the right grinding degree of the espresso

powder you purchase. The grind level must be fine. This is usually indicated on the packaging

• For a single espresso, you usually need 8 to 10 grams of espresso powder while for a double it is 16 to 20 grams.

•

Pressing the espresso powder into the sieve aims to ensure that it enters the sieve evenly. The top layer should be flat and without

cracks/openings, so that the water will be squeezed evenly through the powder when merging. If there are thin spots or openings, the

water will find its way through this to the detriment of the aroma and flavour.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

OldScool 23C10 - 23045 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info