Bedienungsanleitung Olivetti ANYWAY_photo_wireless (Seite 28 von 55) (Englisch)

26345

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

CHAPTER 324

SCANNING AN ORIGINAL FROM YOUR APPLICATION

1 Open the top cover and place the document or photo you want to scan face down on the scanner

glass. Make sure the upper left corner of the front of the item aligns with the upper left corner of the

scanner glass. For more information see "Placing Your Document on the Scanner Glass".

2 Acquire the image from your application.

The scanner driver user interface screen is displayed with a low resolution preview of the document or

image on the left-hand side of the screen. You can:

• Use selection handles to delimit the area of the preview image that you want to scan.

• Rotate, flip, enlarge or reduce the preview image.

• Scan a new preview in case you accidentally removed the original from the scanner glass.

• Launch your final scan according to the settings that you have made.

On the right-hand side of the scanner driver interface screen, customise your scan settings as indicated

in the following table:

Layout • Select to print the individual pages of your document, or your photos,

on a single page layout.

• Select to print multiple pages on a single sheet of paper, fitting 2, 3, 4

or 8 pages of your document, or photos, on the single sheet.

• Define the order in which the multiple pages will be fitted on the

single sheet of paper, and whether to place a border around the

individual page images on the single sheet of paper.

• Select to print multiple pages per poster, thus expanding the contents

of a single page onto more than one sheet of paper.

• Define on how many sheets (2x1, 2x2, 3x3 or 4x4) to fit the selected

poster image and decide whether to place a frame around each

individual image that will make up your poster.

• Return the screen settings to their factory default values, or save the

settings so they are applied to your next print job.

Ink Levels • View the estimated amount of ink remaining in the black and colour

ink cartridges.

• Link directly to the Toolbox Maintenance screen where you can view

maintenance and troubleshooting information.

• Link directly to a screen that provides you with the address of the

manufacturer’s web site, where you can access the information

needed to purchase new ink cartridges.

Clicking on this Printing

Preferences Tab:

You can:

Clicking on this Scanner

Driver Tab:

You can:

Standard • Define whether the document to be scanned consists of black text or

line art only, a combination of black text or line art and colour

graphics or photos, or just photos, and therefore scan at 150 dpi,

300 dpi or 600 dpi respectively.

• Select whether to scan in full colour at 24 bits/pixel, in grey at

8 bits/pixel or in black and white at 1 bit/pixel.

• Return the screen settings to their factory default values, or save the

settings so they are applied to your next print job.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olivetti ANYWAY_photo_wireless Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Olivetti ANYWAY_photo_wireless

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info