Bedienungsanleitung Olivetti d copia 2001 (Seite 34 von 82) (Englisch)

436314

Zoom out

Zoom in

Vorherige Seite

1/82

Nächste Seite

CONVENIENT COPY FUNCTIONS

Using the document glass

Place the first original. (p.18)

Select the original size. (p.18)

Press the [SORT/GROUP] key

( / ) to select the desired mode.

The modes are selected

in the order "SORT"

( ), "GROUP"

( ), "Off".

Set the number of copies and other

settings, and then press the [START]

key ( ).

The ORIGINAL DATA indicator ( ) blinks,

and the original is scanned into memory.

When the start indicator lights,

replace the original with the next

original, and then press the [START]

key ( ).

Repeat step 5 until all originals have been

scanned into memory.

When all originals have been

scanned, and then press the

[READ-END] key ( ).

The copies are delivered to the paper output tray.

Using the SPF

Place the originals. (p.19)

Sort mode is normally the default output mode,

and thus the SPF and SORT indicators light up.

Press the [SORT/GROUP] key

( / ) to select the desired mode.

The modes are selected

in the order

"SORT"( ),

"GROUP" ( ), "Off".

Set the number of copies and other settings,

and then press the [START] key ( ).

The copies are delivered to the paper output tray.

If the memory becomes full

• If the memory becomes full while scanning the

originals, the ORIGINAL DATA indicator ( )

will blink, "FUL" will appear in the display, and the

machine will stop copying.

• To copy the originals that have been scanned up

to that point, press the

[START] key ( )

• To clear the data that has been scanned into

memory, press the [CLEAR ALL] key ( ) or the

[CLEAR] key ( ).

If the paper output tray becomes full

When the maximum number of pages (about 250

pages) that can be held in the paper output tray are

output, copying will temporarily stop. When this

happens, promptly remove the copies and press the

[START] key ( ) to resume copying.

Offset function during Sort/Group copy

The offset function shifts the position of each set or group

of copies in the paper output tray for easy separation.

The offset function setting can be changed in the user

programs. (p.41)

To clear the data in memory, press the

[CLEAR] key

().

• To cancel the Sort/Group copy job, press

the [CLEAR] key

().

• To cancel Sort or Group mode, press the

[SORT/GROUP] key ( / )

repeatedly until the SORT/GROUP

indicators ( / ) are both off.

DATA

Note

• If "Sort auto select" has been set to "1:

OFF" in the user programs, follow the steps

below to select sort mode.

• "Sort auto select" can also be used to

change the default output mode (p.42).

• To cancel the Sort/Group copy job, press

the [CLEAR] key ().

• To cancel Sort or Group mode, press the

[SORT/GROUP] key ( / )

repeatedly until the SORT/GROUP

indicators are ( / ) both off.

Note

DATA

Offset function

When offset function is disabled

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olivetti d copia 2001 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info