Bedienungsanleitung Olivetti d copia 2001 (Seite 45 von 82) (Englisch)

436314

Zoom out

Zoom in

Vorherige Seite

1/82

Nächste Seite

USER SETTINGS

7 Rotation copy

0: OFF

1: ON

• When the auto paper select function is

enabled and there is no paper that is the same

size as the original and loaded in the same

orientation, this function will automatically

select paper of the same size that is loaded in

the opposite orientation, and rotate the image

90 degrees so that it is copied on the paper in

the correct orientation.

• When the auto ratio select function is

operating and the original and paper are

loaded in opposite orientations, this function

rotates the image so that it is copied on the

paper in the correct orientation.

Auto paper select

mode

0: OFF

1: ON

• This function automatically selects paper that

is the same size as the original placed in the

SPF, or the same size as that selected with the

[ORIGINAL SIZE ENTER] key ( ). The

function can be disabled.

9 Auto tray switching

0: OFF

1: ON

• If the paper runs out during printing and there

is paper of the same size and orientation in

another tray, this function automatically

switches to that tray (excluding the bypass

tray). The function can be disabled.

10 to 15 Auditing mode – See "AUDITING MODE SETTINGS" (p.44).

Erase width

adjustment

1: 0 mm (0")

2: 5 mm (1/4")

3: 10 mm (1/2")

4: 15 mm (3/4")

5: 20 mm (1")

• Use this setting to set the width of erasure of

shadows that appear around the edges and at

the binding margin when a book or similar

original is copied.

17 Layout in 2 IN 1 copy

1: Pattern 1

2: Pattern 2

• Use this setting to select the layout pattern

when two original pages are copied onto a

single sheet of paper (see page 31 for the

layout patterns).

18 Layout in 4 IN 1 copy

1: Pattern 1

2: Pattern 2

3: Pattern 3

4: Pattern 4

• Use this setting to select the layout pattern

when four original pages are copied onto a

single sheet of paper (see page 31 for the

layout patterns).

Offset of paper output

tray

0: OFF

1: ON

• When enabled, this function offsets the

position in the paper output tray of interrupt

copy jobs, sets of copies during sort/group

copy, and print jobs when using the printer

function.

22 Margin width

1: 0 mm (0")

2: 5 mm (1/4")

3: 10 mm (1/2")

4: 15 mm (3/4")

5: 20 mm (1")

• Use this setting to set the margin width.

Resolution in Auto/Text

mode

1: 300 dpi

2: 600 dpi

• This setting is used to change the copy

resolution in AUTO and TEXT mode from 600

x 300 dpi to 600 x 600 dpi (high-quality mode).

Scanning is slower when high-quality mode is

used.

Memory allocated to

printer mode

1: 30%

2: 40%

3: 50%

4: 60%

5: 70%

• Use this to change the proportion of machine

memory used for printer mode.

Program

number

Program name

Setting codes

(factory default setting

appears in bold)

Explanation

ENTER

On models with a dual funciton board.

When there are two or more paper trays.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olivetti d copia 2001 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info