Bedienungsanleitung Olivetti d copia 2001 (Seite 53 von 82) (Englisch)

436314

Zoom out

Zoom in

Vorherige Seite

1/82

Nächste Seite

TROUBLESHOOTING

MACHINE/COPYING PROBLEMS

The following problems are related to the general operation of the machine and copying.

Problem Cause and solution Page

The machine does not operate.

The machine is not plugged into a power outlet.

→ Plug the machine into a grounded outlet.

–

Power switch OFF.

→ Turn the power switch ON.

The POWER SAVE indicator ( ) is blinking.

→ Indicates that the machine is warming up. Copies cannot be

made until the machine has finished warming up.

The front cover or the side cover is not completely

closed.

→ Close the front cover or the side cover.

–

The machine is in auto power shut-off mode.

→ In auto power shut-off mode, all lights are off except the POWER

SAVE indicator ( ) and ON LINE indicator ( ). Press the

[START] key ( ) to resume normal operation.

PAPER SIZE indicator is blinking.

→ A blinking PAPER SIZE indicator means that the size of paper

loaded in the tray is different from the paper size setting for the

tray. Change the paper size setting.

To clear the display, do one of the following:

• Use the [TRAY SELECT] key ( ) to change the tray selection.

• Open and close the tray.

• Press the [CLEAR ALL] key ( ).

16, 21

Copies are too dark or too light.

Select the correct original type for the original.

→ Select AUTO with the [AUTO/TEXT/PHOTO] key or press the

[Light] key ( ) and [Dark] key ( ) to manually select an

appropriate exposure.

→ If the copy is too light or too dark even though AUTO was selected

with the [AUTO/TEXT/PHOTO] key

(/ /), adjust

the automatic exposure level.

Blank copies.

The original is not placed face up in the SPF or face down

on the document glass.

→ Place the original face up in the SPF or face down on the

document glass.

18, 19

Part of the image is cut off or there

is too much blank space.

The original was not placed in the correct position.

→ Place the original correctly.

18, 19

An appropriate ratio was not used for the size of the

original and the size of the paper.

→ Press the [AUTO IMAGE] key ( ) to have the copy made

using the appropriate ratio for the original and paper.

The size of paper loaded in the tray was changed without

changing the tray's paper size setting.

→ Be sure to change the tray's paper size setting whenever you

change the size of paper loaded in the tray.

Wrinkles appear in the paper or

the image disappears in places.

The paper is outside of the specified size and weight

range.

→ Use copy paper within the specified range.

Paper curled or damp.

→ Do not use curled or crimped paper. Replace with dry copy paper.

During periods when the machine is not used for a long time,

remove the paper from the tray and store it in a dark place in a

bag to prevent moisture absorption.

–

AUTO

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olivetti d copia 2001 Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info