Bedienungsanleitung Olivetti ECR 2100 Euro (Seite 28 von 64) (Englisch)

624806

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

ENGLISH

EurEur

Eur

o Exchange Rao Exchange Ra

o Exchange Ra

te Prte Pr

te Pr

ogrammingogramming

ogramming

You can program the Euro exchange rate so that the cash register can

automatically calculate the transaction from your local currency into

Euro and vice versa depending on the cash register's base currency

(Local or Euro). The cash register is programmed by default so that

your local currency is the base currency. If you wish to change the base

currency to Euro, refer to the "Programming System Options" section in

this manual, Machine Condition 14.

PrPr

ogramming the Eurogramming the Eur

ogramming the Eur

o Exchange Rao Exchange Ra

o Exchange Ra

tete

Euro exchange rate programming consists of firstly defining the

position of the decimal point of the Euro exchange rate (0-8 digits after

the decimal point), the position for the decimal point of the changed

amount which is also printed on the sales receipt (0-3 digits after the

decimal point), and then the actual current exchange rate (up to 6

digits). To provide you with the Euro value, the cash register divides

the local currency value by the exchange rate defined.

Proceed as follows to program or update the exchange rate of your

local currency into Euro:

1. Slide the control switch to the PRG position.

2. Type the [decimal point position] of the exchange rate (0-8 digits

after the decimal point).

3. Type the [decimal point position] of the converted amount (0-3

digits after the decimal point).

4. Type the [exchange rate] using up to six digits without specifying

any decimal point.

5. Press the [Sub Total] key to store the exchange rate.

Example: Program an exchange rate of £ 0.676 to the Euro.

Type/Press:

[3] + [2] + [000676] + [Sub Total]

PrPr

ogramming System Optionsogramming System Options

ogramming System Options

Your cash register's system options programming feature includes 11

options for the operation of the cash register. Each of the functions

described in this section is already set upon delivery of the cash register

to meet the most frequent requirements. The cash register's factory

default settings, which you can reprogram at any time, are indicated in

bold print in the table below.

Machine Settings

Condition

1 0 = No digit after the decimal point

1 = 1 digit after the decimal point

2 = 2 digits after the decimal point

3 = 3 digits after the decimal point

2 N/A

3 0 = Preset USA tax mode

1 = Preset Canadian tax mode

2 = Preset VAT mode

4 0 = Time display and print in the 24-hour format

1 = Time display and print in the 12-hour format

5 0 = Setting of non-taxable limit without GST TAX for

Canadian tax mode

1 = Setting of non-taxable limit with GST TAX for Canadian

tax mode

6 0 = REG 2 print mode activated

1 = REG 2 print mode deactivated (no printing)

7 0 = Date set in the Month/Day/Year format

1 = Date set in the Day/Month/Year format

8 N/A

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olivetti ECR 2100 Euro Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info