Bedienungsanleitung Olivetti ECR 2450T (Seite 28 von 81) (Englisch)

452059

Zoom out

Zoom in

Vorherige Seite

1/81

Nächste Seite

ENGLISH

3. Using the cash register's aphanumeric keypad or the Character Code

Table in the Appendix, type the character code string for the letters

to be entered on this particular line selected. Remember that up to

24 characters can be entered. If you wish to center a writing, you

will need to calculate the empty character spaces before and after

your string and type the appropriate blank space code (00) in the

corresponding places.

4. Press the [Check] key again to store the newly defined header line.

This new line is automatically printed.

5. Repeat steps 3 and 4 if you wish to program the remaining three

programmable header lines.

Example: Change the fourth line of the default header to *PLEASE

COME AGAIN* with the appropriate spaces before and after to center

this new string and using the Character Code Table provided in the

Appendix.

Type/Press:

[3] + [4] + [Return] + [76 00 00] + [56 52 45 41 59 45 00] +

[43 55 53 45 00] + [41 47 41 49 54] + [00 00 00 76] + [Check]

NOTE: If you wish to use the alphanumeric keypad to type the header

PLEASE COME AGAIN, type [00] for the spaces and then

press the Dept key corresponding to the letter wanted. If the

letter wanted is on the bottom half of the key, firstly press the

[Dept Shift] key and then the related [Dept] key. The asterisk

can only be entered by typing its corresponding code (76) from

the Character Code Table in the Appendix.

Percent Discount (-%)

Setting this option automatically calculates the preset rate each time

the [-%/RA] key is pressed. The percentage rate can be discounted from

an individual item or from a sales transaction total.

Setting a Percent Discount (-%) Rate

Proceed as follows to define a standard discount rate:

1. Turn the PRG key to the PRG position.

2. Type the [numbers] representing the desired percentage rate. Up to

four digits ranging from 0 to 99.99 can be used, and you MUST

enter a total of four digits, two before and two after the desired

decimal place. For example, to enter 10%, type [1000], to enter

6.5% type [0650].

3. Press the [0] key followed by the [-%/RA] key to store the rate.

The programmed rate is printed with the caption "DISCOUNT".

4. Press the [Clear] key to program another feature otherwise exit the

program mode by turning the key to the OFF position.

Example: Program a standard 10% discount rate.

Type/Press:

[1000] + [0] + [-%/RA] + [Clear]

Percent Plus Rate (+%)

Setting this option automatically calculates the preset add-on rate

each time the [+%/PO] key is pressed. This percentage rate can be

added to an individual item or to a transaction total.

Setting a Percent Plus (+%) Rate

Proceed as follows to define a standard add-on rate:

1. Turn the PRG key to the PRG position.

2. Type the [numbers] representing the desired percentage rate. Up to

four digits ranging from 0 to 99.99 can be used, and you MUST

enter a total of four digits, two before and two after the desired

decimal place. For example, to enter 10%, type [1000], to enter

6.5% type [0650].

3. Press the [0] key followed by the [+%/PO] key to store the rate.

The programmed rate is printed along with the caption "ADD ON".

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olivetti ECR 2450T Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info