Bedienungsanleitung Olivetti ECR 6920F (Seite 26 von 59) (Englisch)

452056

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

When the cash register is switched to the training mode, all

training transactions are performed in the REG or MGR

mode.

You can also print a detailed training report to keep track of

the transactions performed in this mode. See "Training

Report" for details.

To use the training facility from the PRG mode:

1. Control lock key position: PRG.

2. Press

A line appears on the display to indicate that the cash

3. Turn the control lock key to REG or MGR to perform

training sales transactions.

To exit the training facility from the PRG mode:

1. Control lock key position: PRG.

2. Press .

To access the training facility from the REG mode:

1. Control lock key position: REG.

2. Type your [4-digit password] and press

A line appears on the display to indicate that the cash register

is in the Training Mode.

To exit the training facility from the REG mode:

1. Control lock key position: REG.

2. Type your [4-digit password] and press .

Programming a Training Mode Password

A training mode password prevents unauthorized access to

the training facility from the REG mode.

1. Control lock key position: PRG.

2. Press

and then

press

3. Type a [4-digit password] and press

NOTE: Do not assign a password 0000.

Example: Define training mode password 9876.

Type/Press:

NOTE: If you define a manager password of 0000, the

password security protection feature will not work.

Example: Define manager password 9876 for the PRG and

Z modes.

Type/Press:

Defining an X Mode Manager Password

1. Control lock key position: PRG.

2. Press

and then

press

3. Type a [4-digit X mode manager password] and press

NOTE: If you define a manager password of 0000, the

password security protection feature will not work.

Example: Define manager password 6789 for the X mode.

Type/Press:

Clearing the PRG, Z and X Manager

Passwords

To clear a PRG, Z or X mode password, program password

by following the instructions in

sections "Defining a PRG and Z Mode Manager Password"

and "Defining an X Mode Manager Password".

Entering a Management Mode Using

a Password

If a manager password was defined to protect unauthorized

access to the PRG, Z and X modes, proceed as follows to

enter the specific password:

1. Control lock key position: PRG.

2. Type the specific 4-digit password.

3. Press

Training Mode

The training mode allows you to use the cash register to

perform true sales transactions for learning purposes. All

transactions performed in this mode are not recorded in the

management financial reports and the sales receipts are not

numbered consecutively: four asterisks are printed instead.

Switch to PRG and Z password definition mode

Password

Switch to X mode password definition mode

Password

Switch to Training mode password definition mode

Password

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olivetti ECR 6920F Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Olivetti ECR 6920F

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info