Bedienungsanleitung Olivetti ECR 6920F (Seite 35 von 59) (Englisch)

452056

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

ENGLISH

Electronic Journal Capacity Display

If the electronic journal was activated for standard opera-

tion (see system option 4), you can also display the number

of sales data lines still available in the journal's memory.

Press outside of a sales transaction and

with the cash register in the REG mode. The value is

displayed on the upper line of the operator display.

Sample Receipts

The following receipt is a typical receipt issued by the cash

The following example receipt contains the least informa-

tion possible. To obtain this receipt, program system op-

tions 60, 61, 62, 63, 64, 66, 77, 78, 79 accordingly. See

"System Options" for details.

Latest Transaction Report

By entering the number of transactions you wish to view,

this report prints the most recent receipts and Z financial

reports performed and stored within the programmed line

capacity.

1. Control lock key position: X or Z. Bear in mind that in the

Z position the journal report contents are cleared. Make

sure there is plenty of paper loaded in the printer.

2. If a PRG and Z mode, or X mode, manager password was

defined type the [4-digit password] and press .

3. Type a number between [001 and 999] indicating the

number of latest reports wanted and press .

Daily Report

By entering the number of Z financial reports that you wish to

view, this report prints the receipts recorded before the

defined Z financial report along with the report itself.

1. Control lock key position: X or Z. Bear in mind that in the

Z position the journal report contents are cleared. Make

sure there is plenty of paper loaded in the printer.

2. If a PRG and Z mode, or X mode, manager password was

defined type the [4-digit password] and press

3. Type a number between [01 and 99] indicating the

number of oldest end-of-day reports wanted and press

Sales Transactions

Entering and Exiting the Register Mode

1. Turn the control lock key to the REG mode.

2. If the Clerk System option was set to active and a clerk

code was programmed, enter the related Clerk number

assigned, press

, type the associated three-digit

secret code and then press .

If the Clerk System option was set to active and a secret

code was not programmed, type any Clerk number and

then press .

Date and Time Display

You can display the current date and time outside of a sales

transaction and with the cash register in the REG mode.

Press to display the date, to display the

time.

Item price

Total

balance due

Change due

Departments

Cash

tendered

Item price with

department

VAT rate

identifier

Total

balance due

Change due

Item price in

non-taxable

department

Date

Machine

number

Clerk number

or assigned

name

Departments

Cash

tendered

Consecutive

receipt number

Time

Customer receipt footer with

max. 24 characters per line

Customer receipt header with

max. 24 characters per line

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olivetti ECR 6920F Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Olivetti ECR 6920F

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info