Bedienungsanleitung Olivetti ECR 8100 (Seite 22 von 70) (Englisch)

452057

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

Example: Select the letters à and Ü.

Type/Press:

RECEIPT HEADER AND FOOTER

By default your cash register prints a header on all

customer receipts. It can also print a personalized

footer, if you program system option 79 accordingly.

See section "System Options" for details.

The default receipt header consists of up to 10 lines of

24 characters each, or 20 lines if you consider the footer

as part of the header. If System Option 79 is set to 1 so

that a footer is printed on the sales receipt, the header

and footer will each consist of 10 lines of 24 characters

each with default captions. You can change the cash

footer using the keypad and/or Character Table to enter

the characters you want.

1. Control lock key position: PRG.

2. Press repeatedly until the message is

displayed indicating the first line of the receipt

header, or the first line of the receipt footer.

3. To jump to a specific header or footer line to

personalize, type the [line number] on the numeric

keypad and then press .

4. Enter the letters or characters of the string you wish

to define and then press . You are now

prompted to personalize the following line.

5. Repeat steps 3 and 4 if you wish to program the

remaining programmable header or footer lines.

6. Press to exit.

Example: Change the third line of the default header to

SALES ON NOW using the CAPS Character Table.

Type/Press:

PERCENT DISCOUNT (-%) OR ADD ON

(+%)

The and keys can be set up to apply a

predefined percentage discount or percentage add on.

The rate can be applied to an individual item or to the

sales transaction total. The procedure for both keys is

the same:

1. Control lock key position: PRG.

2. Type the [4-digit] number representing the desired

percentage rate. A value in the range 0 to 99.99

can be specified. Two digits must be placed before

the decimal point and two must be placed after.

3. Specify whether the rate is a discount or an add on

by entering the appropriate code as indicated

below:

0 = Percent add on

1 = Percent discount (default)

4. Enter the [4-digit] percentage rate limit. A value in

the range from 0 to 99.99 can be used. Two digits

must be placed before the decimal point and two

must be placed after. The default is 9999.

NOTE: When the rate limit is set to 0000, it is not

possible to override the predefined rate

associated with the key.

5. Press or to assign the rate and

function to the respective key.

Example: Program the key with a standard

5.50% discount and a discount limit of 75%, and the

key with a standard 10% add on and an add on

limit of 90%.

Type/Press:

Switch to Recipt

header definition mode

Receipt header line

selection

Confirm entered header

Exit

Units

Decimals

Percent

discount code

Discount max. limit 75%

Units

Decimals

Percent add on code

Add on max limit 90%

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olivetti ECR 8100 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Olivetti ECR 8100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info