42378
13
Zoom out
Zoom in
Vorherige Seite
1/82
Nächste Seite
6
21.[Subtotal w/Tax] - Displays the subtotal of a sale with sales tax.
22.[Euro] - When the cash register is in its default Local base cur-
rency, this key is used to program the Euro exchange rate and to
automatically calculate and display the value in Euro of the total
amount of a sale or of a particular amount registered. When the cash
register is programmed to work in the Euro base currency, pressing
this key converts the sales total to the Local currency.
23.[Amt Tend/TOTAL] (Amount Tendered/TOTAL) - Totals exact
cash transactions, computes change and totals check and charge
transactions.
The Control System
The Control Lock
The control lock is located on the upper left-hand side of the keypad.
The PRG or REG key must be properly inserted in the Control Lock in
order for you to be able to use the different cash register functions
available. The following figure shows the Control Lock and the
different modes that can be used.
Depending on the desired operation, insert the appropriate key in the
Control Lock and turn it to the following positions:
OFF The cash register is turned off and cannot be used.
PRG Used to program the cash register according to your
specific needs.
REG The cash register can perform the standard sales transac-
tions, including preset options.
X Prints the X management report, Cash-in-Drawer report,
PLU report, clerk report, cash declaration and periodical
financial reports.
Z Prints the Z management report and resets totals (except
the grand total) to zero. Prints the PLU report, clerk
report, cash declaration and periodical financial reports.
Control Keys
A set of each of the following keys is provided along with a set of
keys to open the cash drawer and printer compartment:
PRG The PROGRAM key works in all modes (PRG, REG, X
and Z). It is usually used by the Supervisor to program the
cash register, access cash register functions and print X
and Z management reports.
REG The REGISTER key only works in the REG and X modes,
granting both Clerk and Supervisor access to the cash
register functions. This key cannot be used to access the
PRG and Z modes.
13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Olivetti ECR2350 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info