Bedienungsanleitung Olivetti ECR5200 (Seite 10 von 65) (Englisch)

16646

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

ENGLISH

Unpacking and Setting Up the Cash Register

NOTE: Please read this section carefully before attempting to program

the cash register or perform sales transactions.

As soon as you receive the cash register, open its shipping carton and

carefully withdraw each component. Make sure that the cash register and

all of its accessories, listed in the section entitled Standard Accessories,

are present in order to setup the cash register by following these

guidelines:

1. Place the cash register on a level, stable, vibration-free and dust-free

surface. Make sure it is near a grounded power outlet.

2. Plug the cash register into a grounded power outlet.

3. Insert the batteries as explained in the section entitled Inserting/

Replacing Batteries. Do not insert the batteries unless the cash register

is plugged into an electrical power outlet.

WARNING: Before inserting the memory backup batteries, make sure

that the cash register is plugged into an electrical wall

outlet. The machine must be plugged into an electrical

outlet before you insert the batteries.

4. Load the paper tape as explained in the section entitled Loading Paper.

5. Set the desired program options as explained in the section Cash

6. Once the desired program options have been programmed, set the

control switch to the R1 (journal record) or R2 (customer receipt)

position and you are ready to work with the cash register.

Maintaining the Cash Register

Provided below is information on how to maintain your cash register.

NOTE: Before cleaning the cash register, make sure it is powered off

and/or unplugged from the wall outlet. Before unplugging the

cash register from the wall outlet, make sure that four charged

AA standard backup batteries are installed in the battery

compartment. All data stored in memory will be cancelled if

you unplug the cash register from the electrical wall outlet

without back-up battery supply.

1. Keep all liquids away from the cash register so as to avoid spills which

could damage the electronic components.

2. To clean the cash register firstly turn it off and/or unplug it from the

wall outlet (be sure the back-up batteries are installed), then use just a

damp cloth. Do not use corrosive substances such as solvents, alcohol,

petrol, or abrasive components.

3. If the cash register is stored in extreme hot or cold temperatures

(below 32 degrees or above 104 degrees Fahrenheit), allow the

temperature inside the cash register to reach room temperature before

turning it on.

4. DO NOT attempt to pull the paper tape when the cash register is

printing or when you are loading paper. Always use the [Feed] key to

feed paper. Pulling the paper tape could damage the print mechanism.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olivetti ECR5200 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Olivetti ECR5200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info