Bedienungsanleitung Olivetti ECR5300 (Seite 13 von 30) (Englisch)

16654

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

ENGLISH

5. Program a Fixed Price Look-Up (PLU)

Up to 220 PLUs can be programmed.

1. Control switch position: PRG

2. Press

, type the [PLU number (between 1 and

220)] and then press

3. Type the [unit price] that you wish to assign to the PLU.

4. Press the related department

to key to assign

the PLU to a Department from 1 to 14. If tax is required for

a particular PLU item, be sure to link the PLU number

related to the item to a department that is programmed for

tax. To program a department for tax, refer to the section

Link a Multiple/Single Item Sale, Tax Status and Item

Price to a Department.

5. Press

Example: Create PLU 1 with a unit price of £2.69

assigned to Department 3.

Type/Press:

After you have programmed your PLU items, you can print a

report that indicates the programmed values. See section

"PLU Programming Report" for details.

Cash Register Programming and

Features

Programs and transaction information for management re-

ports are stored in the memory of the cash register which is

protected by back-up batteries.

Before beginning to program the cash register or to

perform sales transactions, insert the batteries to save

this information if a power failure occurs or if you

unplug the cash register from the power outlet.

Making Changes to Cash Register

Programming

If you wish to make a change to your initial programming

(such as an update to VAT rates, PLUs or exchange rates):

• Slide the control switch to the PRG position.

• Re-do the program in question and confirm as explained

in the next sections

• Slide the control switch to another operating mode.

A new program entry will automatically overwrite a previous

entry for the same program.

PLU number

PLU price

Department

Percent Discount (-%)

Setting this option automatically calculates the preset rate

each time the

key is pressed. The percentage rate can

be discounted from an individual item or from a sales trans-

action total.

1. Control switch position: PRG.

2. Type the [numbers] representing the desired percentage

rate. Up to four digits ranging from 0 to 99.99 can be used.

3. Press to store the rate.

Example: Program a standard 5.50% discount rate.

Type/Press:

PLU Status

The PLU status programming procedure should only be

performed if you are interested in the Open PLU Price (Sub-

department) option, recommended for items whose prices

change frequently.

The PLU status options are the following:

0 = Fixed PLU Price (the factory set default setting)

1 = Open PLU Price (Sub-department option)

1. Control switch position: PRG.

2. Press

to begin programming the PLU status.

3. Type the [PLU number 1 to 220], press , type the

[PLU Status number] and then press the related

department key. Use

for departments from 8 to 14.

4. Repeat step 3 for all desired PLU numbers.

5. Press key to finish programming the PLU status.

6. Program a Fixed Price Look Up as explained in "Quick

Start".

Example: Create PLU 6 with an open PLU price status to

Department 6.

Type/Press:

Units

Decimals

Start PLU status

programming

PLU number

selection

Status number

Department

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olivetti ECR5300 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Olivetti ECR5300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info