Bedienungsanleitung Olivetti ECR6900 (Seite 16 von 50) (Englisch)

40148

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

Percent Discount (-%) or Add on (+%)

The and keys can be set up to apply a predefined

percentage discount or percentage add on. The rate can be

applied to an individual item or to the sales transaction total.

The procedure for both keys is the same:

1. Control lock key position: PRG.

2. Type the [4-digit number] representing the desired

percentage rate. A value in the range 0 to 99.99 can be

specified. Two digits must be placed before the decimal

point and two must be placed after.

3. Specify whether the rate is a discount or an add on by

entering the appropriate code as indicated below:

0 = Percent add on

1 = Percent discount (default)

4. Enter the [4-digit] percentage rate limit. A value in the

range from 0 to 99.99 can be used. Two digits must be

placed before the decimal point and two must be placed

after. The default is 9999.

NOTE: When the rate limit is set to 0000, it is not possible

to override the predefined rate associated with the key.

5. Press

or to assign the rate and function to the

respective key.

Example: Program the

key with a standard 5.50%

discount and a discount limit of 75%, and the

key

with a standard 10% add on and an add on limit of 90%.

Type/Press:

• Press the letter key on the keypad the number of times

necessary to select the character, as indicated by the

corresponding number on the row at the top of the table.

• Confirm your final caption by pressing

NOTE: Special accented national letters are not displayed.

Example: Select the letters à and Ü.

Type/Press:

Receipt Header and Footer

By default your cash register prints a header on all customer

receipts. It can also print a personalized footer, if you pro-

gram system option 79 accordingly. See section "System

Options" for details.

The default receipt header consists of up to 10 lines of 24

characters each, or 20 lines if you consider the footer as part

of the header. If System Option 79 is set to 1 so that a footer

is printed on the sales receipt, the header and footer will each

consist of 10 lines of 24 characters each with default cap-

tions. You can change the cash register's default header, or

the programmed default footer using the keypad and/or

Character Table to enter the characters you want.

1. Control lock key position: PRG.

2. Press

repeatedly until the message is displayed

indicating the first line of the receipt header, or the first line

of the receipt footer.

3. To jump to a specific header or footer line to personalize,

type the [line number] on the numeric keypad and then

press

4. Enter the letters or characters of the string you wish to

define and then press

. You are now prompted to

personalize the following line.

5. Repeat steps 3 and 4 if you wish to program the remaining

programmable header or footer lines.

6. Press

to exit.

Example: Change the third line of the default header to

SALES ON NOW using the CAPS Character Table.

Type/Press:

Switch to Recipt header

definition mode

Confirm entered

header

Exit

Receipt header

line selection

Units

Decimals

Percent

discount

code

Discount max. limit 75%

Percent

add on

code

Units

Decimals

Add on max limit 90%

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olivetti ECR6900 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Olivetti ECR6900

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info