Bedienungsanleitung Olivetti LAB_S120 (Seite 20 von 64) (Englisch)

16706

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

XVI

GET

STARTED

QUICKLY

REDIAL

ONE

THE

LAST

INCOMING

NUMBERS

ONE

THE

LAST

OUTGOING

NUMBERS

Do not place the document in the ADF or the manual

document feeder.

1. Lift the handset to engage the line.

The display shows:

OFF HOOK

and the length of the call in minutes and seconds in the top

right-hand corner.

2. Press the key:

The display shows:

INCOMING CALLS

HAT

DOCUMENTS

CAN

COPIED

As for transmission, copying requires the document to be

inserted in the document feeder, which may be automatic

(ADF) or manual. Before making a copy, make sure that the

document is correctly inserted in either of the feeders and that it

respects the characteristics described previously (see the "Trans-

mission" section).

Bear in mind however that for the copying function you can only

insert one sheet at a time whether you are using the automatic

document feeder (ADF) or the manual document feeder.

MAKE

COPY

As mentioned previously, you can also use the fax machine

as a photocopier. The printing quality obtained depends

on the type of copy you want to obtain "Normal copy" or

"Quality copy" and the contrast and resolution values

that you select before starting the copying function.

1. Choose the type of contrast on the basis of the following

criteria:

• NORMAL, if the document is neither very light nor very

dark.

• LIGHT, if the document is very dark.

• DARK, if the document is very light.

3. To display the other available option, "OUTGOING CALLS",

press the keys:

4. To confirm your choice, press the key:

5. To find the telephone number or name of the correspond-

ent you wish to call on the list of the last 20 incoming calls or

on the list of the last 10 outgoing calls, press the keys:

6. To start dialling, press the key:

Once the number has been dialled, if the correspondent is

free, you can start talking.

MAKING COPIES

2. Choose the type of resolution on the basis of the following

criteria:

• TEXT, if the document contains easily legible text or sim-

ple graphics.

• PHOTO, if the document contains shaded areas.

3. Insert the document in the ADF or the manual document

feeder.

The display shows on the top line:

DOCUMENT READY

and on the bottom line, the default contrast value: NOR-

MAL.

4. Press the key:

The display shows the default copy size, contrast and reso-

lution settings: 100%, NORMAL and TEXT, respectively. It

also shows the number of copies set (1).

5. Press the key:

The display shows:

COPY: HIGH QUAL.

6. To view the other available option, "COPY: NORMAL",

press the keys:

7. To confirm your choice, press the key:

The display shows:

ZOOM: 100%

8. To choose the desired copy size setting, "140%", "70%" or

"50%", press the keys:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olivetti LAB_S120 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Olivetti LAB_S120

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info