Bedienungsanleitung Olivetti LAB_S120 (Seite 44 von 64) (Englisch)

16706

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

6. To confirm your choice, press the key:

7. To return the fax machine to its initial stand-by mode, press

the key:

note

The daily silent reception setting ("SILENT RX: DAILY") is can-

celled by a power failure.

TO DISPLAY THE CALLER ID

This function, which may be activated by the telephone

company on request by the user, is only available in

some countries and conforms to the ETSI ETS 300

778-1 standard.

This function tells you immediately who is calling. In

this way, you will be able to decide whether to answer the

call or not.

When this function is enabled, if the fax machine is in stand-

by mode, whenever a call is received, it always shows

one of the following items of information:

• number or name of the correspondent who called

you;

• PRIVATE: if the correspondent has chosen not to reveal

his identity to you;

• NOT AVAILABLE: if the correspondent is connected to a

telephone exchange that does not support this service.

If you are programming your fax machine and, when an

incoming call is received, want to know who is calling

you, you must press the

key before answering the

call.

It may however happen, if you are connected to a particu-

lar kind of telephone network, that the number of the caller is

not displayed on the fax machine. If this happens, call your

local customer engineering service centre.

The fax machine is already set up to display the caller

ID. You may however set it up not to display it, as follows:

1. Press the key

until the display shows:

INSTALLATION

2. Press the key:

The display shows:

TEL. LINE SETU-UP

3. Press the key:

The display shows:

ENHANCED FEATUR.

4. Press the key

until the display shows:

CALLER ID: ON

5. To view the other available option, "CALLER ID: OFF",

press the keys:

6. To confirm your choice, press the key:

7. To return the fax machine to its initial stand-by mode, press

the key:

NOTE

With this function enabled, if a power failure occurs and the date and

time are lost, they will be restored when the next call is received.

TO CHANGE THE NUMBER OF RINGS

This function is only enabled in some countries.

If set in "AUTOMATIC", "PHONE/FAX" or "TAD/FAX" re-

ception mode, the fax machine automatically answers calls

after a certain number of rings.

If you want, you can change the number of rings, as fol-

lows:

1. Press the key

until the display shows:

INSTALLATION

2. Press the key

until the display shows:

RING COUNT:02

3. To view the other available values, "01", "03", "04", "05",

"06", "07" and "08", press the keys:

4. To confirm your choice, press the key:

5. To return the fax machine to its initial stand-by mode, press

the key:

TO CHANGE THE RING VOLUME

1. Press the key

until the display shows:

FAX SET-UP

2. Press the key:

The display shows:

DATE AND TIME

3. Press the key:

The display shows:

VARIOUS SETTINGS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olivetti LAB_S120 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Olivetti LAB_S120

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info