424156
80
Zoom out
Zoom in
Vorherige Seite
1/150
Nächste Seite
73
RECEPTION
The display shows the operating condition for the
parameter selected.
4. Press START to confirm the condition displayed, or:
Use
or
to select the alternative condition and
then press START to confirm it.
5. Press STOP to quit the menu and return to stand-by.
MANUAL RECEPTION
You must take action when an incoming call is received if the facsimile machine has been set for manual
reception. This method is probably most convenient when you are in the office as it enables you to use the
telephone line both for telephone and facsimile calls. When the telephone rings, as soon as you lift the handset,
you will realize if it is a voice call or if you have to activate the facsimile machine to receive a document.
Note: if you do not answer a call, after 10 rings the facsimile machine automatically moves into automatic
reception mode. This function can only be activated by the customer engineering service.
o The facsimile machine is on. The message “MANUAL RX” appears on the second line of the display.
1. When the telephone rings, lift the handset.
If you hear someone’s voice, talk as normal.
If you hear an intermittent tone, this means that a remote user wants to send you a document via fax.
2. Press START.
The TX/RX LED comes on while the document is received.
3. Lower the handset.
4. Once reception has been completed, the facsimile machine beeps and the TX/RX LED goes off.
If the “Last RX report” parameter has been enabled in the operating configuration, the facsimile machine
will print the report at the end of reception.
If the machine beeps and the error LED comes on during reception, this means that an error has occurred
(e.g. an interruption in the connection). If this is the case, press LINE STATUS and STOP at the same
time to switch off the error LED and call the remote user to ask him to send the document again.
If the handset is off the hook, the facsimile machine beeps continuously. Replace the handset on
the hook.
80

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

olivetti-ofx-3100

Suche zurücksetzen

  • Gerät druckt nicht aus. Tinte wurde ausgewechselt, Anschlüsse überprüft Eingereicht am 28-9-2019 10:35

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Olivetti ofx 3100 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info