424256
126
Zoom out
Zoom in
Vorherige Seite
1/135
Nächste Seite
115
6. Close the print head
compartment cover and lower
the operator console.
5. Push the print head in the
direction indicated by the arrow
until it clicks into place.
4. Insert the print head in its
compartment with the contacts
towards the front of the machine.
If the new print head is of the disposable type, the display shows the message:
NEW PRINT HEAD?
1=YES 0=NO
Confirm by pressing
1.
At this point, the facsimile machine performs the "Automatic Nozzle Cleaning and Testing
Procedure" (described below) and prints the result on the previously inserted sheet of paper.
AUTOMATIC NOZZLE CLEANING AND TESTING PROCEDURE
Having replaced the print head or ink cartridge, the facsimile machine automatically activates the
nozzle cleaning procedure. It then checks that they are working properly and prints the result on
the sheet inserted automatically after the out of ink message was displayed. The print test contains
a numbered scale and a set of graphics and text to enable the operator to assess the print quality
immediately.
At the end of the procedure, the display shows the message:
CHECK PRINTING QUALITY
1=EXIT 0=REPEAT
Check that there are
no gaps
in the numbered scale
and that there are
no horizontal white lines
in the black areas. If these conditions are respected, this means that the print head has been
correctly inserted and is in perfect working order, therefore press 1: the facsimile machine returns
to standby and is ready for use.
If there are
gaps or white lines
, but the print quality is considered sufficient, press 1, otherwise
press 0 to repeat the nozzle cleaning procedure: if the result of the subsequent test continues to
be unsatisfactory, repeat the procedure for the third and last time.
If the print quality is still unsatisfactory after three cleaning cycles, press 1 and carry out the
"Manual Nozzle Testing Procedure" described in the Routine Maintenance section. If this does not
work either, the print head is probably faulty. Replace it with a new one.
126

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Olivetti ofx 3200 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info