•
The combustion air supply fittings must never be
altered. In particular, it must be ensured that any
necessary combustion air pies are open while the
fireplace is being used.
•
Do not make any changes or modifications to the
stove
Cleaning
Replacement parts
Attention:
Please ask your specialist trader for any replacement
parts required. Always use original spare parts only.
In order to process your order as quickly as possible,
it is imperative that you send us the type and fabrica-
tion number given on the stove’s rating plate.
The rating plate is located on the back of the stove
We recommend the relevant numbers here before
installing the stove to ensure that you always have
them to hand:
Type number: 23/________________
Fabrication number: __________________
What to do if?
The stove doesn’t draw properly?
•
Is the chimney or the stovepipe not air tight?
•
Has the chimney been incorrectly designed?
•
Is the external temperature too high?
•
Are the doors of other fireplaces connected to the
chimney open?
The room doesn’t get hot?
•
Is the heating requirement too high?
•
Is the waste gas pipe blocked?
•
Is the primary air controller closed?
•
Is the chimney draught too low?
•
Is the wood used as fuel not dry?
The stove gives off too much heat?
•
Has the primary air controller been opened too
wide?
•
Is the ash door not tightly closed?
•
Is the delivery pressure too high?
The grate becomes damaged or slags are
formed?
•
The stove was overloaded.
•
The ash pan was not emptied in good time.
•
Is the ash door not tightly closed?
•
Is the delivery pressure too high?
