Bedienungsanleitung Olsberg Corvus (Seite 14 von 36) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

812271

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Heating

●Only place the quantity of fuel required to achieve

the heating requirement.

For a nominal heating output 6,0 kW:

- max. 2,0 kg billet wood; burning time >45 min

- max. 1,8 kg wood briquettes; burning time >45 min

- max. 3 lignite briquettes; burning time >60 min

For max. heat output allowed:

- max. 3 kg billet wood

- max. 3 kg wood briquettes

- max. 6 lignite briquettes

●Open the combustion chamber door slowly for add-

ing new fuel, as otherwise the combustion gases can

escape.

●Empty the ash pan or combustion chamber in good

time. Otherwise it is possible for the combustion air

intake to be blocked or for the grate to be damaged.

●Only remove the ash pan to empty it.

●Clean the ash pan compartment regularly after re-

moving the ash pan to remove any ash that may

have been spilled (e.g. use a vacuum cleaner).

Attention:

Any stove and ash residues must have been left to

cool before being removed.

Heating during the transition period

Prerequisite for the stove to function well is the correct

delivery pressure (chimney draught). This very much

depends on the external temperature. Therefore, if the

external temperatures are high (above 16°C) the deliv-

ery pressure can be disrupted.

What to do?

●Open the primary air controller complete.

●Only put on a small quantity of fuel.

●Frequently stoke the ash.

Cladding

●The cladding may not be overheated, as cracks

could appear.

●Use a maximum of 3 kg wood for heating.

●As the natural cladding comes from a „grown“ boul-

der, structure and colour scheme may be very

different.

●The surface may be altered under temperature

inuence.

Special information

The manufacturer’s guarantee expires if the stove is

signicantly or permanently overloaded above the

nominal heating output, or if fuels other than those list-

ed are used.

●The stove must only be used with the combustion

chamber door shut.

● Never remove hot ashes. Only store ashes in a re-

proof, non-combustible container.

●Attention: The surfaces get hot! Always use the en-

closed glove when operating the stove.

●Convection air openings may not be covered.

● Never use white spirit, benzene or other inamma-

ble, hazardous materials to ignite the re.

● The combustion air supply ttings must never be al-

tered. In particular, it must be ensured that any nec-

essary combustion air pies are open while the re-

place is being used.

● Do not make any changes or modications to the

stove.

Cleaning

What? How often? Using what?

inside of stove at least 1 x per year hand brush,

vacuum cleaner

connection piece at least 1 x per year hand brush,

vacuum cleaner

glass panel as required

when cold

using glass cleaner for

stoves- and oven glasses

painted surfaces as required when cold

with a slightly damp microbre cloth

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olsberg Corvus Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info