Bedienungsanleitung Olympus e-10 (Seite 24 von 118) (Deutsch, Englisch, Französisch, Spanisch)

287645

Zoom out

Zoom in

Vorherige Seite

1/118

Nächste Seite

Setting Resolution Compression

(no. of pixels)

TIFF 2240 x 1680 1:1

SHQ 2240 x 1680 1:2.7

HQ 2240 x 1680 1:8

SQ 1280 x 960 1:8

Setting the Record Mode

The record mode settings determine the quality

of the images and also affects the file sizes.

The better the quality, the larger the file size.

Hold down the record mode button , and then

turn the main dial or sub dial to the left until you

see the desired setting in the control panel

(TIFF, SHQ, HQ, SQ), or turn to the right to

display them in reverse order. The settings are

translated as follows: TIFF (Tagged Image File

Format), SHQ (Super High Quality), HQ (High

Quality), SQ (Standard Quality).

Approximate estimations.

The resolution (number of pixels) and the

compression ratios can be adjusted in the

shooting mode for each setting.

Adjusting Sharpness

In the shooting mode, you can select HARD,

NORMAL, or SOFT for the sharpness setting.

Adjusting Contrast

In the shooting mode, you can select HIGH,

NORMAL, or LOW to adjust the amount of

gradation between areas of different brightness

in the image.

Taking Multiple Exposures in

Sequence Mode

With the camera in the sequential mode, press

and hold down the shutter button to take four

rapid shots. Set the mode dial to P, A, S or M,

and then hold down the drive button until

you see the sequential mode mark in the

control panel. Press and hold down the shutter

button. The camera will continue to take

pictures (up to four) until you release the

shutter button. The pictures are taken at the

same exposure, while bracketing exposures

takes multiple pictures at different exposures.

Using the Self-Timer

The self-timer delays shutter release for 12

seconds so you can include yourself in a group

picture.

Using the Remote Unit RM-1

With the camera in the remote mode, you can

use the Remote Unit RM-1 to release the

shutter while you are standing in front of the

camera.

Using the Optional Remote Cable

RM-CB1

Use the remote cable to prevent camera shake,

caused by pressing the shutter button with your

finger, when shooting at a slow shutter speed.

Using Time Lapse

In the time lapse mode, the camera takes

pictures automatically at specified intervals. You

can specify the time interval in hours and

minutes in a range from 1-minute to 24-hour

time intervals. The camera will continue to

shoot until the batteries discharge, or until the

selected card fills up. For a long shooting

session, connect the optional AC adapter to the

camera to conserve battery power.

For more details and important notes about

using this feature, refer to the Reference

Manual on the CD-ROM provided with the

camera.

Using the Optional Dedicated

External Flash FL-40

Use the optional External Flash FL-40,

dedicated for exclusive use with this camera,

alone or with the camera’s built-in flash. Before

you use the dedicated flash, read the External

Flash FL-40 instructions.

Use the FL-40 the same way you would use the

built-in flash. A generic external flash unit and

the optional FL-BK01 dedicated bracket can

also be used.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olympus e-10 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Olympus e-10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info