Bedienungsanleitung Olympus E-30 (Seite 126 von 156) (Englisch)

62315

126

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

126

Shooting tips and maintenance

xNotes

• Do not use strong solvents such as benzene or alcohol, or a chemically treated cloth.

• Avoid storing the camera in places where chemicals are treated, in order to protect the

camera from corrosion.

• Mold may form on the lens surface if the lens is left dirty.

• Check each part of the camera before use if it has not been used for a long time. Before

taking important pictures, be sure to take a test shot and check that the camera works

properly.

Cleaning mode k Removing dust

If dust or dirt gets on the image pickup device, black dots may appear in the picture. Contact

your Olympus Authorized Service Center to have the image pickup device physically

cleaned. The image pickup device is a precision device and is easily damaged. When

cleaning the image pickup device yourself, be sure to follow the instructions below. If power

runs out during cleaning, the shutter will close, which may cause the shutter curtain and

mirror to break. Keep an eye on the remaining battery power.

1Remove the lens from the camera, and set the

power switch to ON.

2MENU[Y][i][CLEANING MODE]

3Press d, then press the i button.

• The camera enters the cleaning mode.

4Press the shutter button all the way.

• The mirror goes up and the shutter curtain opens.

5Clean the image pickup device.

• Carefully blow off any dust on the surface of the image

pickup device by using a mechanical blower (commercially available).

6Be careful not to catch the mechanical blower in the shutter curtain when turning

the power off to finish cleaning.

• If the camera turns off, the shutter curtain closes, causing the mirror to fall.

xNotes

• Be careful not to let the mechanical blower (commercially available) touch the image pickup

device. If the blower touches the image pickup device, the image pickup device will be

damaged.

• Never put the mechanical blower behind the lens mount. If the power turns off, the shutter

closes, breaking the shutter curtain.

• Do not use anything other than the mechanical blower. If high-pressure gas is sprayed onto

the image pickup device, it will freeze on the image pickup device’s surface, damaging the

image pickup device.

Pixel mapping k Checking the image processing functions

The pixel mapping feature allows the camera to check and adjust the image pickup device

and image processing functions. After using the monitor or taking continuous shots, wait for

at least one minute before using the pixel mapping function to ensure that it operates

correctly.

1MENU[Z][PIXEL MAPPING]

2Press d, then press the i button.

• The [BUSY] bar is displayed when pixel mapping is in progress. When pixel mapping is

finished, the menu is restored.

xNotes

• If you accidentally turn the camera off during pixel mapping, start again from Step 1.

CLEANING MODE

BACK SET

±0

EXT. WB DETECT

EXPOSURE SHIFT

BATTERY TYPE

WARNING LEVEL

AF FOCUS ADJ.

s0017_e_00_0_unified.book Page 126 Thursday, October 30, 2008 2:47 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olympus E-30 Seite 126

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Olympus E-30

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info