453267
89
Zoom out
Zoom in
Vorherige Seite
1/124
Nächste Seite
89
EN
Customizing camera settings
10
Wireless remote control ash photography
External ash units that offer a remote control mode and are designated for use
with this camera can be used for wireless ash photography. The built-in ash
can independently control up to three groups of remote ash units. See the
documentation provided with the external ash units for details.
1
Set the remote ash units to RC mode and place them as desired.
Turn each ash unit on, press the MODE button, and select RC mode.
Select a channel and group for each ash unit.
2
Select [ON] for [# RC MODE] in X Shooting menu 2 (P. 108).
The super control panel switches to RC mode.
You can choose a super control panel display by repeatedly pressing the INFO
button.
Select a ash mode (note that red-eye reduction is not available in RC mode).
3
Adjust the settings for each group in the super control panel.
Flash intensity value
250250 F5.6
3838
A MODE
TTL
+
1.0
M 1 / 8 LO
OFF
2CH
0.00.0
Group
Select the ash control
mode and adjust the ash
intensity individually for
groups A, B, and C. For
MANUAL, select the ash
intensity.
Normal ash/Super FP ash
Switch between normal
ash and Super FP ash.
Communication light level
Set the communication light
level to [HI], [MID], or [LO].
Channel
Set the communication
channel to the same
channel used on the ash.
Flash
intensity
Flash control
mode
4
Press the #UP button to raise the built-in ash.
After con rming that the built-in and remote ash units have charged, take a
test shot.
Wireless ash control range
Position the wireless ash units with their
remote sensors facing the camera. The
following illustration shows the approximate
ranges at which the ash units can be
positioned. The actual control range varies
with local conditions.
5m
10m
100°100°
50°50° 50°50°
60°60°
30°
30° 30°
30°
# Caution
The built-in ash can not be used as a light source in RC mode.
We recommend using a single group of up to three remote ash units.
Remote ash units can not be used for second curtain slow synchronization or anti-
shock exposures longer than 4 seconds.
If the subject is too close to the camera, the control ashes emitted by the built-in
ash may affect exposure (this effect can be reduced by reducing the output of the
built-in ash by, for example, using a diffuser).
89

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Olympus E-PL2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Olympus E-PL2

Olympus E-PL2 Bedienungsanleitung - Deutsch - 127 seiten

Olympus E-PL2 Bedienungsanleitung - Holländisch - 127 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info