Bedienungsanleitung Olympus FL-50 (Seite 14 von 36) (Englisch)

777000

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

60 61

Battery used in Battery used in Battery used in Flash interval Flash count

FL-50 FP-1 HV-1

Approx. 2.5 sec. Approx. 510 times

BN-1 Approx. 1 sec. Approx. 780 times

BN-1 Approx. 1 sec. Approx. 400 times

CUSTOM SETUP

Custom setup allows each user to customize flash setup to suit his or her preferences.

Setup procedure

1. Turn the electronic flash on.

2. Press and hold the MODE button for more than 2 sec-

onds, until the setup mode display appears in the control

panel.

3. Turn dial A to select the setup mode.

4. Turn dial B to select the value.

5. Press the MODE button to exit from setup and return to

the previous control panel display.

●Power grip

•Flash Power Grip FP-1

(The RG-1 remote grip cable and FL-CB01 or FL-CB02 flash bracket cable [depending on the

digital camera used] are required.)

OPTIONAL ACCESSORIES

This accessory allows the electronic flash to be used as a

grip-on type flash powered from four C (R14) alkaline dry cell

batteries.

Using these batteries together with the electronic flash bat-

teries makes it possible to charge the flash at a higher speed

and increase the available flash emission count.

●External power supply

• Flash High Voltage Set SHV-1

(High Voltage Pack HV-1, Ni-Mh Battery Pack BN-1, and AC Adapter AC-2)

The Ni-Mh battery pack BN-1 incorporated in this accessory

makes it possible to charge the flash at a higher speed and

increase the available flash emission count.

■Note

Up to 10 successive full flashes are permitted. To allow the light-emitting surface to cool, the flash should not be

used for at least 10 minutes after 10 m flashes have been fired. See page 28 for details.

4-3

OFF

Setup mode Mode display Value display Function Default

Dial A Dial B

AF illuminator

Only works with the

Olympus Four Thirds

System digital SLR cam-

era. It does not work with

other cameras.

AF illuminator is activated according to the

control from the camera.

AF illuminator is defeated.

Flash cable Use this setting when not using the flash

cable (clipping on to the hot shoe).

Use this setting when using the flash cable

(off flash cable).

Firing angle

(ZOOM) display

Firing angle (ZOOM) is displayed in terms

of the lens focal length of a FOUR THIRDS

digital camera.

Firing angle (ZOOM) is converted into the fo-

cal distance of the 135 type. This allows the

flash to be used in the same feeling as the

flash for a 135 type (35 mm film) camera.

Distance display

unit Distance is displayed in meters.

Distance is displayed in feet.

Light intensity

adjustment Light intensity cannot be adjusted.

Light intensity can be adjusted.

Wide panel

switch disabling

The wide panel switch is activated. Use

this setting to detect that the wide panel

has been slid out.

The wide panel switch is deactivated. Use

this setting when the wide panel is dam-

aged so that the firing angle can be

changed with the ZOOM button.

AA/R6 alkaline

battery

C/R14 alkaline

battery

• The flash emission interval and count data were obtained from in-house tests at Olympus.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olympus FL-50 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info