Bedienungsanleitung Olympus FL-50R (Seite 17 von 36) (Englisch)

470768

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

66 67

Q&A

QIs multi-flash shooting possible in the TTL AUTO mode?

ANo, it is not possible.

QWhen are test flash activation and auto checking effective?

AChecking the optimum flash activation based on the AUTO CHECK lamp is particularly effec-

tive in bounce flash (in AUTO modes only).

QWhat will happen if the electronic flash is activated simultaneously with the camera’s built-in

flash?

AIn the TTL mode, both flashes emit light simultaneously and the optimum exposure is deter-

mined according to the combined total light intensity (provided that the camera is in the P or A

shooting mode). In bounce flash photography, the camera’s built-in flash can also be used for

catch-light photography (see page 59).

QWhy does the electronic flash get hot after successive firing?

AThe batteries generate heat when flash firing is repeated successively. In this case, use the

electronic flash at intervals until the flash emission section and batteries cool down.

QWhy can’t I mount the electronic flash on the camera?

AThe electronic flash cannot be mounted if the lock pin is in the out position. If this is the case,

turn the lock ring all the way in the opposite direction to [←LOCK] until it stops. Once the lock

pin is in the in position, you can mount the electronic flash on the camera (see page 44).

QWhy doesn’t the control mode change when I press the MODE button?

AWhen the electronic flash is connected to certain types of communication-capable camera,

the flash control mode can only be controlled from the camera.

QWhat is the recommended white balance setting for the camera when using the flash?

AThe auto white balance mode is recommended. If you use the manual white balance mode,

set the color temperature to 5500K. Note that the color temperature varies depending on the

flash shooting conditions.

QThe light control range is not displayed on the control panel. What is wrong?

AThe light control range is not displayed in the following cases:

• When the Extension Tube EX-25 (optional) is used

•When the lens is removed

•During bounce photography

•During light intensity adjustment

•When the ISO speed and lens iris (F) are out of the setting range

QWhen the Olympus E-1 digital camera enters the sleep mode, the FL-50 control panel displays

turn off. Is this normal?

AYe s, it is normal. When the E-1 enters the sleep mode, the FL-50 does as well. When the

camera wakes up, so does the FL-50.

QDoes the FL-50 also turn off when the Olympus E-1 digital camera is turned off?

AWhen the E-1 is turned off, the FL-50 enters the sleep mode. When the E-1 is turned on again,

the FL-50 also turns on. When you want to turn off the FL-50, turn off the FL-50 before turning

off the E-1. In addition, when connected to a camera without communication capability, the

FL-50 enters the sleep mode if it is not operated for about 60 minutes.

WARNING DISPLAY LIST

Warning details Control panel display Ref. Page

Out of light control

range in AUTO mode

Subject too close in

MANUAL mode

Subject too close in

FP MANUAL mode

Downward bounce

in all modes

Wide panel request

in all modes

Wide panel warning

in all modes

Camera that dis-

plays warnings

Remedy

Change the camera’s ISO

speed or lens iris (F) set-

ting.

①Change the camera’s

ISO speed or lens iris

(F) setting.

②Change the guide num-

ber (GN) setting.

①Change the camera’s

ISO speed or lens iris

(F) setting.

②Change the guide num-

ber (GN) setting.

Set the wide panel.

The light-emitting section

is set at 7° downward.

Cancel this setting except

for close-up flash photog-

raphy.

The wide panel is set.

Pay attention to the dis-

tance to the subject since

a lower guide number (GN)

is selected.

Out of light control

range in AUTO

mode

Change the camera’s ISO

speed or lens iris (F) set-

ting.

Digital camera with communication capability

Digital camera without communication capability

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olympus FL-50R Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Olympus FL-50R

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info