Bedienungsanleitung Olympus LS-11 (Seite 23 von 86) (Englisch)

538315

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

About Recording

REC

s button

STOP

4 button

button

This can be adjusted

in a range from [0]

to [10]. The larger

the number on the

dial is the higher the

recording level will

be, and the indicator

position of the level

meter will grow

larger as well

Before starting recording, select a folder between

[A] to [E]. These five folders can be selectively

used to distinguish the kind of recording; for ex-

ample, Folder [A] might be used to store private

information, while Folder [B] might be dedicated

to holding business information.

Recording

• The recording indicator light will flash and

[ ] will appear on the display.

• The voice sync level can be set when voice

sync recording is on.

• [Rec Mode] cannot be changed in the

recording standby mode or while recording.

Configure this while the recorder is stopped

(☞ P.41, P.43).

• The various functions related to recording

can be configured to suit the recording

conditions (☞ P.41, P.43, P.44).

• The level indicator position of the level

meter will change in accordance with the

switching of the various settings related

to recording. Confirm the recording level

through the level meter after switching the

settings.

Use the

REC LEVEL

dial to adjust the

recording level.

Select the recording folder (☞ P.19 to

P.21).

How to change folders:

Pressing the LIST button at the file display

while stopped will return you back one layer

above.

Pressing the LIST button repeatedly will

bring you to the folder list display.

Pressing button 2 or 3 at the folder list

display will select the folders for voice

recordings.

• Newly recorded audio will be saved as the

last file in the selected folder.

• This recorder is designed to be able to

record cleanly and evenly, even in record-

ing conditions such as when the volume

of the source sound changes significantly.

However, even higher sound quality record-

ings can be achieved by adjusting the

recording level manually.

• If too big sound is input, the noise may

occur even if [Rec Level] is set to [Auto]

or [Limiter On]. Also, in certain cases the

[PEAK] indicator light, which notifies large

input, may not light. To ensure successful

recordings, we recommend that you test the

record function and volume before use.

• When [Rec Level] is set to [Auto] the record-

ing level will be adjusted automatically.

Set [Rec Level] to [Manual] when using the

recording level adjustment function and the

limiter function

(☞ P.41, P.43).

Press the

REC

s button and prepare to

record.

• Turn the microphone in the direction of the

source to be recorded.

Remaining recording time

b Level meter (change according to the

recording level and recording function

settings)

Recording mode

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olympus LS-11 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Olympus LS-11

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info