538318
36
Zoom out
Zoom in
Vorherige Seite
1/108
Nächste Seite
2
36
EN
e
4 Press the REC (s) button to start
recording.
The recording/shooting indicator light
grows and [K] will appear on the sub LCD.
d E
lapsed recording time
5 Press the STOP (4) button to stop
recording.
[L] will appear on the sub LCD.
e F
ile length
Notes
T
o ensure that you do not lose the beginning
of the recording, confirm that the recording is
activated by checking the recording/shooting
indicator or the mode indicator in the sub LCD.
When remaining recording time is less than 60
seconds, the PEAK/LED indicator light starts
flashing. When the recording time is decreasing
to 30 or 10 seconds, the light flashes faster.
[Folder Full] will appear when the recording
cannot be made any further. Select other folder
or delete any unnecessary files before recording
(
P.58).
[Memory Full] will appear when there is no
free space. Delete any unnecessary files before
recording any further (
P.58).
If the REC
(s) button is pressed when a function
other than the record function is specified,
[Cannot record in this folder] is displayed.
Select a folder from [F
older A] through [Folder
E] and start recording again.
Depending on the sound recording mode and
the status of record media, the data transfer
to the media cannot be done in time during
recording and the skipped sound may be
recorded. In this case, [Data Write Error] will
appear during recording or when the recording
is finished. After transferring the data to the PC,
format the record media.
Recording A
d
Actually producing the sound you would
like to record:
When a loud sound is produced the level
meter will swing all the way over to the right
while recording and the PEAK/LED indicator
light will turn on. When this happens
the sound will be recorded in a distorted
manner since the recording level is too high.
When a loud noise is produced, adjust the
recording level so that the level meter does
not exceed [6dB].
When the level meter is maxed out
(the recorded sounds will be distorted).
Example of conditions where the
recording level has been lowered and the
excess input has been adjusted.
Recording
A
36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Olympus LS-20M wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Olympus LS-20M

Olympus LS-20M Bedienungsanleitung - Deutsch - 108 seiten

Olympus LS-20M Bedienungsanleitung - Holländisch - 108 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info