Bedienungsanleitung Olympus Mju 760 (Seite 52 von 84) (Englisch)

42317

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Getting to know your camera better

The flash is activated automatically when there is insufficient light, or when the camera is

shaken. To take pictures with no flash in dark places, set the flash mode to [$] and set as

follows:

Increase the [ISO] setting

g “ISO Changing the ISO sensitivity” (P. 22)

There are several factors that can cause the picture to appear grainy.

Using the digital zoom to take close-up pictures

• With the digital zoom, part of the image is cropped and enlarged. The greater the

magnification, the grainier the picture appears.

g “DIGITAL ZOOM Zooming in on your subject” (P. 23)

Increasing the ISO sensitivity

• When you increase the [ISO] setting, “noise”, which appears as spots of unwanted color or

unevenness in the color, can be introduced and give the picture a grainy appearance. This

camera is equipped with a function to allow shooting at high sensitivity while suppressing

noise; however, increasing the ISO sensitivity can result in some noise, depending on the

shooting conditions.

g “ISO Changing the ISO sensitivity” (P. 22)

• The reason why there are sometimes differences between the actual colors and the colors

recorded in a picture is related to the light source illuminating the subject. [WB] is the

function that helps the camera determine the true colors. Normally, the [AUTO] setting

provides the optimal white balance, but depending on the subject, results may be better if

you manually adjust the [WB] setting.

• When the subject is in the shade on a sunny day

• When the subject is illuminated by both natural light and indoor lighting, such as when

near a window

• When there is no white in the center of the frame

g “WB Adjusting the color of a picture” (P. 22)

• Take pictures with K in s mode. Suitable for taking pictures on a sunny day at the

beach or in the snow.

g “s (Scene) Selecting a scene mode according to the shooting situation” (P. 21)

• Often, bright subjects (such as snow) turn out darker than their natural colors. Use 1F to

adjust toward [+] to make these subjects closer to their true shades. Conversely, when you

are shooting dark subjects, it can be effective to adjust toward the [–]. Sometimes, using the

flash may not produce the brightness (exposure) that was intended.

g “1F button Changing picture brightness” (P. 14)

•With [ESP/n] set to [n], the picture can be taken based on the brightness at the center

of the monitor without being affected by the light in the background.

g “ESP/n Changing the area for measuring the brightness of a subject” (P. 23)

• Set the flash to [#] to activate fill-in-flash. You can shoot a subject against backlight without

the face of the subject appearing dark. [#] is effective for shooting against backlight and

under fluorescent and other artificial lighting.

g “3# button Flash shooting” (P. 15)

Taking stabilized pictures without the flash

The picture is too grainy

Taking pictures with the correct color

Taking pictures of a white beach or snow scene

Taking pictures of a subject against backlight

d4328_e_0000_7.book Page 52 Friday, December 15, 2006 10:47 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olympus Mju 760 Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Olympus Mju 760

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info