Bedienungsanleitung Olympus mju 830 (Seite 53 von 84) (Englisch)

103032

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Getting to know your camera better

g “Turn the camera on” (P. 6)

“X Setting the date and time” (P. 35)

The battery has been pulled out of the camera

• The date and time settings will be returned to the factory default settings if the camera is left

without battery for approximately 1 day. Also, the date and time setting will be canceled

earlier than this if the battery has been in the camera for a short period of time. Before taking

important pictures, check that the date and time settings are correct.

There are several ways to focus, depending on the subject.

When the subject is not in the center of the frame

• Place the subject in the center of the frame, lock the focus on the subject, and then

recompose your picture.

• Set [AF MODE] to [iESP].

g “AF MODE Changing the focusing area” (P. 25)

The subject is moving quickly

• Focus the camera on a point roughly the same distance away as the subject you want to

shoot and lock the focus (by pressing the shutter button halfway). Then recompose your

picture and press the shutter button completely as the subject enters the frame.

• Under certain types of conditions, it is difficult to focus using auto focus. The green lamp on

the monitor lights, allowing you to check if the focus is locked.

In these cases, focus (focus lock) on an object with high contrast at the same distance as

the intended subject, recompose your shot and then take the picture. If the subject has no

vertical lines, hold the camera vertically and focus the camera using the focus lock function

by pressing the shutter button halfway, and then return the camera to the horizontal position

while keeping the button pressed halfway and take the picture.

Be sure to hold the camera firmly with both hands and press the shutter button slowly so as to

avoid moving the camera. You can also reduce the blurring by pressing h before shooting

the picture.

g “h button Shooting pictures using the image stabilizer” (P. 17)

Pictures are more likely to be blurry when:

• images are shot at a high-magnification zoom setting, i.e. using both optical zoom and digital

zoom functions,

• the object is dark and the shutter speed is slow, or

• scene modes where the flash is turned off and/or the shutter speed is slow.

Shooting tips

Focusing on the subject

Subjects that are difficult to focus on

Prevent blur by using image stabilization

The green lamp

blinks.

The subject cannot be

brought into focus.

Subject with low

contrast

Subject with an

extremely bright area

in the center of the

frame

Subject without

vertical lines

Subjects at different

distances

Fast-moving subject The subject is not in

the center of the frame

The green lamp lights,

but the subject cannot

be brought into focus.

d4357_e_0000_72.book Page 53 Monday, July 30, 2007 10:01 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olympus mju 830 Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Olympus mju 830

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info