Bedienungsanleitung Olympus RF-11 (Seite 51 von 53) (Englisch)

776853

Zoom out

Zoom in

Vorherige Seite

1/53

Nächste Seite

50 51

Q&A

QThe FC-1 cannot be turned on.

AIt cannot be turned on in the following cases.

•When the connector(s) for the unused flash (either the Ring Flash or Twin Flash) is not

capped.

•When both the Ring Flash and Twin Flash are connected.

QIs multi-flash shooting possible in the TTL AUTO mode?

ANo, it is not possible.

QWhy does the flash get hot after successive firing?

AThe batteries generate heat when flash firing is repeated successively. In this case, use the

flash at intervals until the light-emitting section and batteries cool down.

QWhy can’t I mount the FC-1 on the camera?

AIt cannot be mounted if the lock pin is in the out position. If this is the case, turn the lock ring all

the way in the opposite direction to [ﬂ LOCK] until it stops. Once the lock pin is in the in

position, you can mount the FC-1 on the camera (page 14).

QWhy doesn’t the control mode change when I press the MODE button?

AWhen the Macro Flash System is connected to certain types of communication-capable cam-

era, the flash control mode may only be controlled from the camera.

QWhat is the recommended white balance setting for the camera when using the flash?

AThe auto white balance mode is recommended. If you use the manual white balance mode,

set the color temperature to 5500K. Note that the color temperature varies depending on the

flash shooting conditions.

QWhen the Olympus E-1 Four Thirds System digital camera enters the sleep mode, the FC-1’s

control panel display turns off. Is this normal?

AYe s, it is normal. When the E-1 enters the sleep mode, so does the FC-1. When the camera

wakes up, so does the FC-1.

QDoes the FC-1 also turn off when the Olympus E-1 digital camera is turned off?

AWhen the Olympus E-1 Four Thirds System digital camera is turned off, the FC-1 enters the

sleep mode. When the E-1 is turned on again, the FC-1 also turns on. When you want to turn

off the FC-1, turn off the FC-1 before turning off the E-1. In addition, when connected to a

camera without communication capability, the FC-1 enters the sleep mode if it is not operated

for about 60 minutes.

MAIN SPECIFICATIONS

Macro Flash Controller FC-1

Model Number : FS-FC1

Type : External flash controller for digital still camera

Light-emitting device

:Ring Flash RF-11 or Twin Flash TF-22, exchangeable.

Auto power OFF :

Interlocks with the auto power OFF operation of a camera with communication capability.

Illuminator : Automatic firing at low intensity, possible only when a camera with com-

munication capability is connected.

Standard effective distance

0.2 to 3 m (0.7 to 9.9 ft) (Variable depending on the camera and lens in use.)

Power supply : AA (R6) alkaline dry cell batteries (LR6) x 4,

AA (R6) Ni-Cd batteries x 4,

AA (R6) Ni-Mh batteries x 4,

AA (R6) Ni-Mn batteries (ZR6) x 4,

AA (R6) lithium batteries (FR6) x 4 or

3 V lithium battery pack (Olympus LB-01) x 2

External power supply

Flash High Voltage Set SHV-1 (optional)

Dimensions : 78(W) x 141(H) x 119(D) mm (3.1 x 5.6 x 4.7 in.) (excluding protrusions)

Weight : 320 g (11.3 oz) (excluding batteries)

Operating environment

:Temperature: 0 to 40°C (32 to 104°F).

Humidity: No more than 80% (without condensation).

Ring Flash RF-11

Model Number : FS-RF11

Type : External flash for digital still camera

Guide numbers : TTL AUTO : 11

MANUAL : 0.7 to 11

Firing angle : 80°

Flash emission period

:Approx. 1/560 sec.

Flash emission count

:Approx. 250 times (using the LR6-type AA (R6) alkaline dry cell batter-

ies) or approx. 420 times (using the LB-01 lithium battery packs). (Vari-

able depending on shooting conditions)

Recharge time : Approx. 4 seconds (using the AA (R6) alkaline manganese batteries) or

approx. 4 seconds times (using the LB-01 lithium battery packs).

Flash modes : TTL AUTO and MANUAL

Illuminator : 4 lamps built in.

Lens mount : Bayonet

Cable length : Approx. 100 mm (3.9 in)

Dimensions : 120(W) x 135.5(H) x 24(D) mm (4.7 x 5.3 x 0.9 in.) (excluding cable)

Weight : 145 g (5.1 oz)

Operating environment

:Temperature: 0 to 40°C (32 to 104°F).

Humidity : No more than 80% (without condensation).

(From full flash activation to

lighting of Charge lamp)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olympus RF-11 Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info