Bedienungsanleitung Olympus SP-620UZ (Seite 67 von 76) (Englisch)

470758

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Monitor

•Do not push the monitor forcibly; otherwise the image may

become vague, resulting in a playback mode failure or damage

to the monitor.

•A strip of light may appear on the top/bottom of the monitor, but

this is not a malfunction.

•When a subject is viewed diagonally in the camera, the

edges may appear zigzagged on the monitor. This is not a

malfunction; it will be less noticeable in playback mode.

•In places subject to low temperatures, the monitor may take a

long time to turn on or its color may change temporarily. When

using the camera in extremely cold places, it is a good idea to

occasionally place it in a warm place. The monitor exhibiting

poor performance due to low temperatures will recover in

normal temperatures.

•The monitor of this product is manufactured with high-quality

accuracy, however, there may be a stuck or dead pixel on the

monitor. These pixels do not have any inﬂ uence on the image

to be saved. Because of the characteristics, the unevenness

of the color or brightness may also be found depending on the

angle, but this is due to the structure of the monitor. This is not

a malfunction.

Legal and Other Notices

•Olympus makes no representations or warranties regarding

any damages, or beneﬁ t expected by using this unit lawfully,

or any request from a third person, which are caused by the

inappropriate use of this product.

•Olympus makes no representations or warranties regarding

any damages or any beneﬁ t expected by using this unit

lawfully which are caused by erasing picture data.

Disclaimer of Warranty

•Olympus makes no representations or warranties, either

expressed or implied, by or concerning any content of these

written materials or software, and in no event shall be liable

for any implied warranty of merchantability or ﬁ tness for any

particular purpose or for any consequential, incidental or

indirect damages (including but not limited to damages for loss

of business proﬁ ts, business interruption and loss of business

information) arising from the use or inability to use these

written materials or software or equipment. Some countries do

not allow the exclusion or limitation of liability for consequential

or incidental damages or of the implied warranty, so the above

limitations may not apply to you.

•Olympus reserves all rights to this manual.

Warning

Unauthorized photographing or use of copyrighted material

may violate applicable copyright laws. Olympus assumes no

responsibility for unauthorized photographing, use or other acts

that infringe upon the rights of copyright owners.

software may be reproduced or used in any form or by any

means, electronic or mechanical, including photocopying and

recording or the use of any type of information storage and

retrieval system, without the prior written permission of Olympus.

No liability is assumed with respect to the use of the information

contained in these written materials or software, or for damages

resulting from the use of the information contained therein.

Olympus reserves the right to alter the features and contents of

this publication or software without obligation or advance notice.

FCC Notice

•Radio and Television Interference

•Changes or modiﬁ cations not expressly approved by the

manufacturer may void the user’s authority to operate this

equipment. This equipment has been tested and found to

comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a

residential installation.

•This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio

communications.

•However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of

the following measures:

•Adjust or relocate the receiving antenna.

•Increase the distance between the camera and receiver.

•Connect the equipment to an outlet on a circuit different from

that to which the receiver is connected.

•Consult your dealer or an experienced radio/TV technician

for help. Only the OLYMPUS-supplied USB cable should

be used to connect the camera to USB enabled personal

computers (PC).

Any unauthorized changes or modiﬁ cations to this equipment

would void the user’s authority to operate it.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olympus SP-620UZ Seite 67

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Olympus SP-620UZ

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info