Bedienungsanleitung Olympus VN 4100 PC (Seite 4 von 10) (Englisch)

61286

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

To Pause Recording

To Pause

Press the REC button during recording.

➥ “PAUSE” appears on the display and the record/play indicator

light flashes.

To Resume Recording

Press the REC button again.

➥ Recording will resume at the point of interruption.

Notes

s If “FULL” appears on the display, you cannot record in the selected folder. In such a case, erase

unnecessary files or download to PC (VN-1100PC/VN-2100PC/VN-3100PC/VN-4100PC).

s If the recorder is placed directly on a table when recording a meeting, it tends to pick up table vibrations.

Put a notebook or other item between the table and the recorder so that the vibration is not easily

transmitted for clearer recording.

s Even if you press the DISPLAY button, the display will not change to current recording time if the

remaining recording time is 5 minutes or less.

s When remaining recording time falls to 1 minute or less, the Record/play indicator light flashes red.

s The recorder will enter Stop mode if it has been left paused for 60 minutes or longer.

s In case of difficult acoustic conditions or low speaker’s voice, recording in XHQ or HQ is recommended.

Also, usage of an external microphone (sold separately) could improve the quality of recordings.

s The input level cannot be adjusted on this recorder. When you connect the recorder to an external

device, execute a test recording and adjust the output level of the external device.

Recording from External Microphone or Other Devices

The external microphone and other devices can be connected and

the sound can be recorded.

s When the external microphone is connected to the microphone jack of the

recorder, the built-in microphone will not operate.

s When using an external microphone, choose adequate microphone, such as a

Noise-Cancellation microphone or Electret condenser microphone (optional).

s When connecting an external equipment, use the connecting cord KA333 (optional).

LCD Display Information

You can select an option for the display of the recorder. This help review and confirm different

recorder settings and file information.

Recording

Press the FOLDER button to

select the desired folder

Press the REC button to start

recording.

The Record/play indicator light turns red,

and recording starts.

To stop recording, press the

STOP button.

New recordings are saved as the last file

in the folder.

a Current folder

b Current recording

mode

c Current file number

d Recording time

e Remaining recording

time

A audio input

terminal of

other devices

State of the

recorder

While in stop

mode

While in

record mode

While in stop

mode or

playback mode

Operation

Press and hold

the STOP button

Press the

DISPLAY button

Press the

DISPLAY button

Display

The total number of files recorded in the folder and

remaining recording time appears on the display.

The display switches between current recording time and

remaining recording time.

Playing time → Remaining playing time → Recording date

of the file → Recording time of the file → Playing time . . .

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olympus VN 4100 PC Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Olympus VN 4100 PC

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info