Bedienungsanleitung Olympus VN6500 (Seite 6 von 165) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

459944

Zoom out

Zoom in

Vorherige Seite

1/165

Nächste Seite

• If you press the STOP (4) button

during a menu setup operation,

the recorder will stop and apply the

items that were set to that point.

Recording Modes [HQ SP LP]

The recording mode can be chosen

from [HQ] (high quality sound

recording), [SP] (standard recording)

and [LP] (long-term recording).

In Menu mode selection...[HQ], [SP], [LP]

VN-7500 VN-6500 VN-5500

Approx.

81 h.

Approx.

40 h.

30 min.

Approx.

20 h.

5 min.

Approx.

215 h.

50 min.

Approx.

107 h.

55 min.

Approx.

53 h.

40 min.

Approx.

1208 h.

30 min.

Approx.

604 h.

15 min.

Approx.

300 h.

30 min.

1 Current recording mode (Fig. i)

• The recording time shown above

is for one continuous file. The

available recording time may be

shorter than speci ed if several  les

are recorded. (Use the remaining

time and recorded time only as

references.)

Microphone Sensitivity [

]

Microphone sensitivity is adjustable to

meet your recording needs.

In Menu mode selection...[g], [i]

High-sensitivity

mode that records

sounds in all

directions

Low-sensitivity

mode suited for

dictation

• To ensure successful recording, make

a test recording to select appropriate

microphone sensitivity before

recording.

• If you select [g], we recommend

setting the recording mode to [HQ]

to best take advantage of the higher

sensitivity.

• If you select [ g], background

noise may be high depending on the

recording conditions.

1 Current microphone sensitivity

(Fig. o)

Using the Variable Control

Voice Actuator [VCVA]

When the microphone senses that

sound has reached a preset volume,

the built-in Variable Control Voice

Actuator (VCVA) starts recording

automatically, and stops it when the

volume drops.

Particularly helpful for extended

recording, the VCVA not only

conserves memory by turning off

recording during silent periods, but

also makes playback more efficient

and convenient.

In Menu mode selection...[On], [OFF]

• During recording, press the + and

– buttons to adjust the VCVA level

in 15 levels.

• The record/play indicator light is lit

during recording. When the recorder

is in Standby mode, the Record/Play

indicator light  ashes and [VCVA]

 ashes on the display.

1 VCVA indicator (Fig. ;)

System Sounds [BEEP] (Fig. a)

Informs a button operation or a wrong

operation of the recorder by sound.

System sounds may be turned off.

In Menu mode selection...[On], [OFF]

• If the alarm playback function has

been set, the alarm will sound at the

scheduled time even if the system

sounds are disabled.

Alarm Playback Function [

]

You can use the alarm playback

function to sound the alarm tone

for 5 minutes at the scheduled time.

Within this 5 minutes, pressing any

button other than the HOLD switch

starts the recorder to playback the

preselected file.

In Menu mode selection...[SET], [On],

[OFF]

After selecting [SET], press the PLAY

(`) button to set the time.

•

With the alarm playback function, only

one  le can be played back. Select a

 le for the function before setting the

time.

1 Alarm indicator (Fig. s)

To cancel an alarm playback:

For [k] in the menu mode, select [OFF] and

press the PLAY (`) button.

• Regardless of the selected folder,

once the alarm playback is set,

it operates every day unless the

setting is canceled.

• To view the current setting, select

[On], and press the PLAY (`) button.

• The alarm tone stops automatically

if no button is pressed within 5

minutes after the alarm starts. The

 le is not played back in this case.

• If the recorder has no recorded  le

in the selected folder, the alarm

playback function is not available.

• Alarm playback occurs every day

unless it is set to [OFF].

Timer Recording [TIMER]

You can schedule for automatic

recording, specifying the start time

and end time of recording. When the

timer-controlled recording completes,

the setting is released.

In Menu mode selection...[SET], [On], [OFF]

After selecting [SET], press the PLAY

(`) button to set the time.

1 Timer indicator (Fig. d)

To cancel the timer setting:

For the timer in the menu mode, selec t [OFF],

and press the PLAY (`) button.

• To view the current setting, select

[On], and press the PLAY (` )

button.

•

With this function, you can set

only the start and the end time of

recording. The current settings of

the recording mode, microphone

sensitivity, VCVA and folder are

applied for the settings before you

set timer-controlled recording.

• The setting exceeding the remaining

recording time is not allowed.

• You can record at any time even if it

is not within the speci ed recording

duration. However, if that makes

the remaining recording time

insu cient for the timer-controlled

recording, the recording will not

complete.

• If any operation is ongoing, the

timer-controlled recording is

overridden.

Other Functions

Moving File between Folders

You can move files recorded in folders

[F], [G], [H] and [I] to other folders.

The moved file is added to the end of

the destination folder.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olympus VN6500 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info