Bedienungsanleitung Olympus WS-110 (Seite 12 von 14) (Englisch)

61296

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Clearing an Index Mark

1 Locate the index you want to clear.

2 Press the 9 or 0 to select the index mark to delete,

and press

(ERASE) button.

Press the

(ERASE) button while the index number appears

for approximately 2 seconds on the display.

The index mark is erased.

sIndex marks cannot be placed on files created on machines other than Olympus IC

recorders, but temp marks can be placed instead to temporarily remember desired

locations. The operation procedure is the same as that of the index mark.

sTemp marks are temporary markings, so if you move to another file, or connect the

recorder to a computer, they will be automatically erased.

sUp to 16 index and temp marks can be set in a file.

sIndex or temp numbers after the erased index or temp number will automatically

move up.

sIndex or temp marks cannot be set or erased in a locked file.

Other Functions

Index Marks

If index marks are placed, you can quickly find a location you want to listen to in fast

forward and fast rewind and when cuing a file.

Setting an Index Mark

1 Press the

(INDEX) button during recording (pause

recording) or playback to set an index mark.

A number appears on the display and an index mark will be

placed.Even after an index mark is placed, recording or

playback will continue so you can place index marks in other

locations in a similar manner.

Connecting to Your PC

Apart from using this unit as a recorder, you can use it as an external memory for your

computer, as a storage device.

s You can save the voice files recorded with this recorder on your PC as back-up.

s You can save images, text data, etc. on this recorder.

s The recorder will record in WMA (Windows Media Audio) format.

The audio files recorded by this recorder can be played back on your computer using

Windows Media Player. You can also transfer the WMA files downloaded with Windows

Media Player to your recorder and enjoy them (excluding files with copyright protection).

1 Before you detach the recorder, set the HOLD switch

in the direction indicated by the arrow, and make sure

that the display is turned off.

If you detach the recorder before the display is turned

off, data may be damaged.

2 Connect the recorder’s USB terminal to a PC USB

port or USB hub.

Once “Remote” is displayed, you can save or read the data.

“ PC” is displayed while sending the data. “ PC” is

displayed and the record/play indicator light flashes while

receiving the data.

3 Transfer the audio files to your computer.

Connect the recorder to your computer and launch Explorer.

The recorder will be recognized as a removable disk.

Each of the five folders is named as DSS_FLDA, B, C,

D and E. The audio files are saved in these folders.

All the audio files recorded by this recorder will be in

WMA format.

( i.e. WS_110001.WMA)

You can copy them to any folder on your computer.

Double click the audio file, and Windows Media Player

will be launched and start playing back.

If you are using Windows 2000, Windows Media Player

must be installed on the PC.

Click the on the task bar located at the lower-right

corner of the screen. Click [Safely Remove Hardware].

➜

Sending the date

Receiving the data

➜

USB terminal

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olympus WS-110 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info