Bedienungsanleitung Olympus x 925 (Seite 41 von 62) (Englisch)

289791

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

Usage Tips

If the camera does not work as intended, or if

an error message is displayed on the screen,

and you are unsure of what to do, refer to the

information below to ﬁ x the problem(s).

Troubleshooting

Battery

“The camera does not work even when

batteries are installed”.

Insert recharged batteries in the correct direction.

“Charging the battery” (p. 10), “Loading the battery

and the xD-Picture Card

(sold separately) into

the camera” (p. 11)

Battery performance may have been reduced

temporarily due to low temperature. Take the

batteries out of the camera, and warm them by

putting them in your pocket for a while.

Card/Internal memory

“An error message is displayed”.

“Error message” (p. 42)

Shutter button

“No picture is taken when the shutter

button is pressed”.

Cancel sleep mode.

To save battery power, the camera automatically

goes into sleep mode and the monitor turns off

if there is no operation for 3 minutes when the

camera is turned on. No picture is taken even if

the shutter button is fully pressed in this mode.

Operate the zoom buttons or other buttons to

restore the camera from sleep mode before

taking a picture. If the camera is left for another

12 minutes, it automatically turns off. Press the

n button to turn the camera on.

Press the K button to set a shooting mode.

Wait until #(ﬂ ash charge) stops blinking before

taking pictures.

●

Monitor

“Difﬁ cult to see”.

Condensation

may have occurred. Turn off the

power, and wait for the camera body to become

acclimated to the surrounding temperature and dry

out before taking pictures.

Dew drops can form in the camera when it is

suddenly taken from a cold location into a warm,

humid room.

“Vertical lines appear on the screen”.

This condition may occur when the camera is

pointed at an extremely bright subject under a

clear sky and so on. The lines do not appear,

however, in the ﬁ nal image.

“The light is caught in the picture”.

Shooting with ﬂ ash in dark situations results in

an image with many ﬂ ash reﬂ ections on dust in

the air.

Date and time function

“Date and time settings return to the

default setting”.

If the batteries are removed and left out of the

camera for about a day

, the date and time

settings return to the default setting, and must

be reset.

The time until the date and time settings return

to the default setting varies depending on how

long the batteries have been loaded.

“Setting the date and time” (p. 13)

Miscellaneous

“The camera makes a noise when taking

pictures”.

The camera may activate the lens and make a

noise even if no operation is performed. This

is because the camera automatically performs

actions of auto focus as far as it is ready to shoot.

●

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olympus x 925 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Olympus x 925

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info