Bedienungsanleitung Omega 8520 (Seite 13 von 24) (Englisch)

466669

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

26 27

English

Self-winding chronograph with date

Operating instructions2

Calibres 3888, 3890 (fig. XXI)

Correcting the day: pull the crown out to position 2, turn the

crown backwards, then push the crown back to position 1.

Note:

in the quick mode, the date is changed in two steps. Check

that the date hand (calibre 3888) or day disc plate (calibre 3890)

is centred after the change has been made.

Date-setting is not recommended between 10pm and 2am. During

this time lapse and under certain conditions, a safety element can

prevent these corrective functions from working.

3. Time setting: hours – minutes – seconds. Pull the crown out to

position 3. The seconds hand will stop. Turn the crown forwards or

backwards. Synchronise the seconds by pushing the crown back to

position 1 to coincide with a given time signal.

Chronograph functions:

• Pusher A: start – stop, start – stop, etc.

Timing to 1/8th of a second for up to 12 hours or up to 7 days for

calibres 3888 and 3890.

• Pusher B: reset (after a stop).

Note:

the chronograph must always be stopped before the zero

resetting function is used. Never push the chronograph’s two pushers

(A and B) simultaneously (calibres 3301, 3303 and 3313).

Self-winding split-seconds chronograph

Operating instructions2

CALIBRE 3600 (fig. XVII)

CALIBRE 3612 (fig. XVIII)

Watch functions (calibre 3600)

The crown has 2 positions:

1. Normal position (wearing position): when the crown is posi-

tioned against the case, the crown ensures that the watch is water-

resistant.

2. Time setting: hours – minutes – seconds. Pull the crown out to

position 2. The seconds hand will stop. Turn the crown forwards or

backwards. Synchronise the seconds by pushing the crown back to

position 1 to coincide with a given time signal.

Watch functions (calibre 3612)

The crown has 3 positions:

1. Normal position (wearing position): when the crown is posi-

tioned against the case, the crown ensures that the watch is water-

resistant.

2. Correcting the date: pull the crown out to position 2, turn the

crown backwards, then push the crown back to position 1.

NB: the date cannot be corrected between 9pm and 12.30am.

3. Time setting: hours – minutes – seconds. Pull the crown out to

position 3. The seconds hand will stop. Turn the crown forwards or

backwards. Synchronise the seconds by pushing the crown back to

position 1 to coincide with a given time signal.

Occasional winding: if the watch has not been worn for 45 hours

(calibre 3600) or 55 hours (calibre 3612) or more, wind it up with the

crown in position 1.

Chronograph functions:

• Pusher A: start - stop, start - stop, etc.

Timing to 1/8th of a second for up to 12 hours.

OMEGA_V12-I.indb Abs1:26-Abs1:27OMEGA_V12-I.indb Abs1:26-Abs1:27 28/12/09 18:30:3328/12/09 18:30:33

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Omega 8520 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Omega 8520

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info