KNOW YOUR OMEGA JUICER
TO ASSEMBLE:
STEP 1 Place receptacle behind motor base housing.
STEP 2 Place bowl on motor base housing with
spout facing you and in the middle of the two raised
projections.
STEP 3 Place coupling on top of bowl with groove
in the middle, aligned with spout.
STEP 4 Place strainer basket inside bowl, making
certain that it rests flat on platform center hex nut.
STEP 5 Insert cutter blade inside strainer basket
with teeth up, centering it over hex nut.
STEP 6 Tighten nut finger tight. Do not over tighten.
STEP 7 Place cover on bowl with ejection chute
opening to rear.
STEP 8 Place tabs of latch arms over cover and secure.
STEP 9 Insert plunger in cover opening.
TO DISASSEMBLE:
STEP 1 Remove plunger from cover opening.
STEP 2 Release both side latch arms by inserting
fingers into the two side openings at the bottom of the
motor base housing and pulling outward and upward.
STEP 3 Remove cover.
STEP 4 Unscrew nut by turning counterclockwise.
STEP 5 Lift out bowl, basket and cutter blade together.
STEP 6 Remove strainer basket, coupling and blade
from bowl.
SPECIAL NOTE: The stainless steel basket is a
precision-engineered item that should be handled
carefully. This will help the juicer run efficiently,
smoothly, and for a very long time.
