Bedienungsanleitung Omron BF 306 (Seite 5 von 8) (Englisch)

483399

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

English

Disposal of used batteries should be carried out in accordance

with the national regulations for the disposal of batteries.

As the batteries may leak and damage the main unit, please

note the following points:

• Remove the batteries from this unit when you are not going

to use it for a long period of time (approximately three

months or more).

• Replace the worn batteries with new ones immediately.

• Do not use manganese and alkaline batteries together.

• Do not use new and worn batteries together.

3.3 Setting the personal data before taking a measurement

Step 1: Push the O/ I button.

All the display segments turn on

Step 2: Push the Set button to enter the

setting mode.

Step 3: Setting height (range: 100.0 cm

to 199.5 cm).

1. The height value 160.0 cm flashes

and HEIGHT is indicated.

2. Push the ▼/▲ button to set the height

value. The height value increases by

increments of 0.5 cm each time the

▲ button is pressed or decreases

each time the ▼ button is pressed. By pushing the button for

more than 1 second, the height values change at a faster

rate.

3. Push the Set button to set the height value. The display

changes to the weight setting screen.

Step 4: Setting weight (range: 10.0 kg to 199.8 kg).

1. The weight value 60 kg flashes and

WEIGHT is indicated.

2. Push the ▼/▲ button to change the

weight value. The weight value

increments by 0.2 kg each time the

▲ button is pressed or decreases each time the ▼ button is

pressed. By holding the button for more than 1 second, the

weight values change at a faster rate.

3. Push the Set button to set the weight value. The display

changes to the age setting screen.

Step 5: Setting age (range: 18 to 70 years old).

1. The age value 40 flashes and the

AGE is indicated.

2. Push the ▼/▲ button to change the

age. The age values change by 1 year.

By holding the button for more than

1 second, the age values change at a faster rate.

3. Push the Set button to set the age value. The display

changes to the gender setting screen.

Step 6: Setting gender (male/ female).

1. The gender male flashes and

MALE is indicated.

2. Push the ▼/▲ button to change the

gender. The display of male or female

flashes alternately.

3. Push the Set button to set the gender.

Now all the set items are stored, is displayed.

Step 7

Continue with the next paragraph: to carry out the measure-

ment, paragraph 3.4.

3.4 To take a measurement

Step1: Stand with both feet slightly apart.

Step 2: Hold the grip electrodes.

Wrap your middle finger around the

groove of the handle. Place the palm of

your hand on the top and the bottom

electrodes. Put your thumbs up, resting

on top of the unit.

Step 3: Hold your arms straight out, at a

90 degree angle to your body. Do not

move during the measurement.

Step 4: Confirm the ready to measure

display.

The indicator turns on.

Step 5: Push the START button.

The display turns on.

Step 6: Immediately after having pushed

the Start button, hold the electrodes

correctly with both hands as shown on

the right. The unit automatically detects

that it is held and starts measuring.

Step 7:

During measuring, the display shown to

the right turns on and the arrows rotate

from LOW to TOO HIGH.

As soon as measurement is finished the

FAT% is displayed on the left display,

while indicating the interpretation of

this value (NORMAL >> TOO HIGH) on

the right display. After approx. 5

seconds, both displays change to BMI

(Body Mass Index).

Every 5 seconds, the displays change

from FAT% to BMI and vice-versa.

You can start another measurement

when the indicator turns on.

For an explanation how to interpret the

measurement results in detail, please

refer to chapter 4.

Step 8: Push the O/I button to turn the

power off.

If you do not push the O/I button, the

unit will turn off automatically,

approximately three minutes after

displaying the measurement results.

BODY FAT MONITOR BF306

13413 manual BF306 INT_13413 manual BF306 INT 11/12/28 23:38 ページ 5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Omron BF 306 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Omron BF 306

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info