Introduction
Important Safety Information
1. Know Y
2. Preparation
3. Using Y
4. Using Memory Function
5. Ot
6. Error Messages and Troubleshooting
7. Maintenance
8. S
9. Limited W
10. Guidance and Manufacturer
Thank you for purchasing the RS1 Automatic Wrist Blood Pressure
Monitor. This blood pressure monitor is to bt.
This blood pressure monitor uses the oscillometric metood
pressure measurement. When the cuff inflates, this monitor senses
the pulses
are called oscillometr. The electronic pressure sensor
displays a digital reading of blood pressure.
Safety Instructions
This instruction manual provides yo
about the RS1 Automatic Wrist Blood Pressure Monitor. T
the safe and proper use of this monitor
all of the safety and operaterstand
these questions, tail
outlet r
information about your own blood pressure, consult with your
physician.
Intended Use
This device is a digital monitor intended for use in measuring blood
pressure and pulse rate in adult patient population with wrist
circumference ranging from 13.5 cm to 21.5 cm. This monitor
detects the appearance of irregular heartbeatsnt
and gives a warning signal with readings. I for
general household use.
Receivin
Remove this monitor from the packaging and inspect for damage. If
this monitor is damaged, DO NOT USE and consult with your
OMRON retail outlet or distributor
Please read the Important Safety Information in this instruction
manual before using t
Please follow this instruction manual thoroughly fory.
Please keep t
own blood pressure, CONSUL
Wa
Indicates a potentially hazardous situation
which, if not avoided,
seriou
• DO NOT use this monitor on infants, toddlers, children or
persons who canno
• DO
pressure monitor
physician.
high blood pressure.
• DO NOT use this monitor on an injured wrist or a
medical treatment.
• DO NOT apply the wrist cuff on your wrist wh
intravenous drip or blood t
• DO NOT use this monitor in areas con
(HF) surgical equipm
equipment, computerized tom
may result in incorrect operation of the
an inaccurate reading.
• DO
flammable gas.
• Consult with your phy
have common arrhythmias such as a
premature beats or atrial fibrillation; arterial sclerosis; poor
perfusion; diabetes; pregnancy; pre-eclampsia or renal
disease. NOTE that any of these co
patient motion, trembling, or shivering may affect
measurement reading.
• NEVER diagnose or treat yourself based on your readings.
AL
• This product contains small part
hazard if swallowed by infan
Battery Handling and Usage
• Keep batteries out of the reach of infants, toddlers or
children.
Caution
Indicates a potentially h
which, if not avoided, may result in m
moderate
damage to the equip
• Stop using this monitor a
you experience skin irritation or discomfort.
• Consult with your phy
wrist where intravascular access or therapy
venous (A-V) shunt, is present becau
interference to blood flow which
• Consult with your phy
have had a mastectom
• Consult with your phy
have severe blood flow prob
inflation can cause bru
Au
Pr
RS1 (HEM-6160-E)
Instruction Manual
IM-HEM-6160-E-EN-02-12/2018
2829375-0B
T
Introduction
Important Safety Info
• DO NOT take measurements more of
because bruising, due to
• ONL
• Remove the wrist cuff if it does n
measurement.
• DO NOT use this monitor for any pu
measuring blood p
• During measurement,
other electrical device that emits electromagnetic fields is
within 30 cm of this monitor. This may result in incorrect
operation of the mon
• DO NOT disassemble or attem
other components. This may cause an inaccurate reading.
• DO NOT use in a location where there is moisture o
water splashing this monitor. This may damage this monitor
• DO NOT use this
• DO NOT drop or subject th
vibrations.
• DO NOT use this monito
or high or low temperatu
• Ensure this monitor is not impairing blood circulation by
observing the wrist while measurement is occu
• DO NOT use this monito
medical clinics or physician
• DO NOT use this monitor with other medica
equipment simultaneously
operation of the mon
• A
exercising and eating for at l
measurement.
• Rest for at least 5 minutes befo
• Remove tight-fitting, thick clothing and any accessories from
your wrist while taking a measurement.
• Remain still and DO N
• ONL
circumference is wit
• Ensure that this monitor has acclimated to room temperature
before taking a measurement. T
extreme temperature chan
reading. OMRON recommends waiti
hours for
monitor is used in an
specified as operating con
the maximum or at the m
additional information of operatin
temperature, refer to chapter 8.
• DO NOT crease the wrist cuff excessively
• Read and follow the “Correct Disposal of This Product” in
chapter 10 when disposing o
accessories or optional part
• DO NOT use this monitor after the durable period has end
Refer to chapter 8.
Battery Handling an
• DO NOT insert batteries with their pol
aligned.
• ONL
NOT use other types of bat
batteries together. DO NOT use different brands of batteries
together
• Remove batteries if this monitor will not be used fo
period of t
• If th
plenty of clean water. Consult with your physician
immediately
• If battery fluid should get on yo
immediately with plenty of clean, lukewarm ,
injury or pain persist
• DO NOT use batteries after their expiration date.
• Periodically check batteries to ensu
working cond
• ONL
unsupported batteries may
to this monit
1.1 Content
Monitor
1.2 Monitor
a. Wrist cuff
(Wrist circumference 13.5 cm to 21.5 cm)
b. Display
c. Battery compartment
d. [Memory] button
e. [ST
1.3 Display and Symb
1. Know Y
2013 ESH/ESC* Guidelines for the m
arterial
Definitions of hypertension by ofevels
These ranges are from statistical values for blood pressure.
• NEVER diagnose or treat yourself based on your readings.
ALyour physician.
2.1 Installing
1. Push down
cover and pull downward.
2. Insert 2 “AAA” alkaline batteries as
indicated in the battery compartment.
3. Close the battery cover
• When ” the
you replace batteries.
• Tteries.
Then replace with 2 new alkaline batteries at the same t
• Replacing batteries will not delete previous
• The supplied batteries may have a shorter life than new batteries
• Disposal of used batteries should be carried out in accordance
with local regulations.
A
Systolic blood pr
B
Diastolic blood
C
Heartbeat symbo
Flashes while taking a measurement.
D
Cuff wrap guid
Appears if
correctly while taking a measurement. It also
appears when viewing past readings.
Cuff wrap guid
Appears if the wrist cuff is not wrapped around the
wrist correctly while taking a measurement. It also
appears when viewing past readings.
E
Memory symbol
Appears when viewing readings stored in the
memory
F
Irregular heartbeat symbo
Appears along
with readings
when an irregular
rhythm
2 or more times
during a
measurement.
An irregular
heartbeat rhythm
is defined as a
rhythm that is 25% less or 25% more than the
average rhythm detected while your
measuring blood pressure. If it continues to appear
we recommend you to consult with and follow the
directions of your physician.
G
flashes
Battery symbol (low)
Flashes when batteries are low
appears
Battery symbol (depleted)
Appears when batteries are depleted.
H
Deflation symbol
Appears during cuff deflation.
I
Pulse display
Pulse rate appears after the measurement.
Office Home
Systolic Blood
Pressure
≥ 140 mmHg ≥ 135 mmHg
Diastolic Blood
Pressure
≥ 90 mmHg ≥ 85 mmHg
* European Society of Hypertension (ESH) and
of Cardiology (ESC).
2. Prep
Irregular Heartbeat
Normal Heartbeat
Pulse
Blood pressure
Blood pressure
Short
Long
Pulse
1
2
2.2 Blood Pressure Measure
Teading, follow these directions:
• S
stressful times.
• Measurements should be taken in a quiet place.
• It is important to take measurement
T
recommended.
• Remember to have a record of your bloo
readings for your physician. A single measurement d
provide an accurate indication of you
Please use the Blood Pressure Diary to keep records of several
readings over a certain period of time. Tf
the diary
• Avoid bathing, drinking alcohol or caffeine, smoking, exercising
and eating for at least 30 minutes before taking a measurement.
• Rest for at least 5 minutes before taking a measurement.
2.3 Applying the Wr
• Following steps are for applying the wrist cuff to your lefrist.
When you take a measurement on your right wrist, apply the wrist
cuff using the same steps as on your lef
• The blood pressure can differ between the right wrist and the left
wrist, and the measured blood pressure values can be different.
OMRON recommends to always use the same wrist for
measurement. If the values between both wrists differ
substantially st
use for your measurements.
• Remove tight-fitting, thick clothing and any accessories from your
wrist while taking a measurement.
1. Apply the wrist cuff to your left
wrist.
Roll up sleeve. Make sure your
sleeve is not rolled up too tightly on
your
of blood in your arm.
2. Put your wrist through the cuff loop.
Y
face upward.
3. Position the wrist cuff leaving a
clearance of 1 to 2 cm between
the cuff and the bottom of your
pal
4. Wrap the wrist cuf
your wrist. Do not apply over
clothing.
Check to
between your wrist and the cuff.
• Make sure the wrist cuff does not
cover the protruding part of the wrist
bone on the outside of your wrist.
2.4 Sitting Correctly
T
need to be relaxed and
comfortably
a comfort
your
your arm.
• Sit in a chair with your legs
uncrossed and your feet flat on
the floor
• Sit with your back and arm
being supported.
• Y
approximately the same level
as your heart. If the monitor is
too high above your heart, your bloally
lowssure
will be artificially high.
• Relax your wrist and hand. Do not bend your wr
your fist, or bend your wrist forward.
Wrist cuff
