Bedienungsanleitung One for All 8-Device Universal Remote with Learning (Seite 14 von 20) (Englisch)

492801

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

OWNER’S MANUAL

Re-assigning Device Keys 13

high frequency ones, and other

unusual formats.

• For optimum learning, avoid high

levels of ambient light such as natural

sunlight or energy-efficient fluorescent

lights.

NOTE: Please have your original remote

controls handy before programming learning.

Be sure to press each teaching key within 5

seconds of the previous entry. Otherwise, the

One For All 8L Universal Remote Control

with Learning (URC-8820 B00) exits the

learning mode.

PROGRAMMING A LEARNING KEY

1. Press and hold SET until the LED (red

light) blinks twice, then release SET.

2. Enter 9 7 5. The LED will blink twice.

3. Press a device key once (e.g., TV) to

assign a mode for learning.

4. Press the desired key once (e.g., +100)

to store a feature to be learned. The

LED will turn on and remain on for 5

seconds. If the LED does not turn on,

go back to step 1 and start again.

5. Place your original remote control

(e.g., TV remote control) head-to-head

(about 2" apart) from the One For All

8L Universal Remote Control with

Learning (URC-8820 B00).

6. On your original remote control, press

and hold the key (i.e., feature) to be

learned until the LED on the One For

All 8L Universal Remote Control with

Learning (URC-8820 B00) turns off

and then blinks twice. If the LED does

not blink twice, repeat steps 3 through

7. To learn functions onto other learning

keys (e.g., M1 and M2), repeat steps 3

through 6.

8. To lock in new feature(s) on the One

For All 8L Universal Remote Control

with Learning (URC-8820 B00), press

and hold SET until the LED blinks

twice, then release SET.

9. To test a learned feature, press a device

key (e.g., TV) once where the learning

mode was assigned. Then press the

learning key (e.g., +100) where the

learned feature is stored.

DELETING FUNCTIONS FROM THE LEARNING

KEYS

1. Press and hold SET until the LED (red

light) blinks twice, then release SET.

2. Enter 9 7 6. The LED will blink twice.

3. Press the device key once where the

learned feature is stored (e.g., TV).

4. Press the learning key (e.g., +100) to

be deleted twice. The LED will blink

twice after the second press.

5. To clear additional functions stored on

other learning keys, repeat steps 1

through 4 (in this section).

RE-ASSIGNING DEVICE

KEYS

You can set the One For All 8L Universal

Remote Control with Learning (URC-8820

B00) to control a second TV, VCR, DVD

player, or other device. For example, to

control a TV, a cable box, and two DVDs,

you will need to re-assign the unused AUX

key to operate the second DVD as follows:

1. On the remote control, press and hold

SET until the LED (red light) blinks

twice, then release SET.

2. Enter 9 9 2. The LED will blink twice.

3. Press DVD once, then press AUX once.

OFA 8L with Learning Owners Manual.fm Page 13 Monday, January 24, 2005 10:04 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

One for All 8-Device Universal Remote with Learning Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info